Rycote HC-15 Short Shotgun Microphone

  • Hypercardioid short shotgun with very low self-noise
  • Active RF filtering and mechanical RF shielding
  • Available alone or with a Nano-Shield kit

From $594.95 USD

Brand: Categories: , Trew SKU: RYCHC15

Rycote HC-15 Short Shotgun Microphone

The Rycote HC-15 is a hypercardioid short shotgun microphone for film, television, news, broadcast, sound design, and field recording.

The HC-15 pairs a moderately directional pickup with very low self-noise for a shotgun of its size. It suits close-up dialogue booming in tight shots, news gathering on camera, mono field recording, and sound effects work, where the mic can work close to the source. An individually tuned back electret capsule feeds a compact, very low-noise preamp that draws little power.

Fine-tuned mechanical RF shielding guards against interference. The gold-plated Neutrik XLR connector carries P48 phantom power, and the mic also runs from 24 V, with a lower maximum SPL. The preamp body is non-corrosive machined brass and the capsule and interference tube are machined aluminum. Rycote designs and makes the HC-15 at its UK factory.

Features

  • Hypercardioid short shotgun microphone
  • 133 dB SPL maximum (1% THD)
  • Individually fine-tuned back electret capsule
  • Fine-tuned mechanical RF shielding
  • Gold-plated Neutrik XLR connector
  • P48 phantom power (also runs from 24 V)
  • Machined brass preamp and aluminum interference tube
  • Available alone or with a Nano-Shield windshield kit

Available Options

Kit What’s Included Part Number
With Nano Shield Kit NS2-CA HC-15, case, and Nano-Shield Kit NS2-CA HC15NS2SET
Microphone Only HC-15 and case 079001

What's Included

  • HC-15 microphone
  • Case
  • Nano-Shield Kit NS2-CA (With Nano Shield Kit option only)

Specifications

Polar Pattern Hypercardioid
Capsule Type Back electret condenser
Frequency Range 50 Hz to 20 kHz
Output Sensitivity 45.0 mV/Pa (−26.9 dB)
Max Output Voltage 5 Vp (load under 2 kΩ)
Output Impedance 100 Ω
Min Load Impedance 1 kΩ
CMRR (1 kHz) Over 60 dB
Max Cable Length 100 m (328 ft)
Powering P48 (24 to 48 V; max SPL reduced at 24 V)
Current Consumption About 3.0 mA
Max SPL 133 dB SPL (1 kHz, 1.0% THD)
RFI Shield Yes
Connector XLR-3M
Weight 90 g (3.17 oz)
Color Matte black with red accent
Scroll to Top

MANUFACTURER RESTRICTIONS

The manufacturer limits where we can sell this product.

United States and Canada: No restrictions. Canadian orders see live shipping rates from our Toronto and Vancouver stores at checkout.

Outside the US and Canada: We may not be able to ship this product.