Rycote CA-08 Compact Cardioid Condenser Microphone

  • Cardioid pencil condenser with 13.0 dB-A self-noise
  • Virtually flat from 70 Hz to 20 kHz
  • Includes hard case, clamp, and foam

$461.95 USD

In Stock

Brand: Categories: , Trew SKU: RYC.979003 MPN: RYC079003

Rycote CA-08 Compact Cardioid Condenser Microphone

The Rycote CA-08 is a compact cardioid pencil condenser for studio and field recording, built on Rycote’s low-noise preamp and capsule design.

The CA-08 gives slight directionality with a virtually flat response from 70 Hz to 20 kHz, dropping off gradually below 60 Hz. It sounds like the rest of Rycote’s microphones, so it cuts together cleanly with them. It works singly or in matched stereo pairs. This page is for one microphone; the stereo pair is sold separately.

The capsule is a broadcast-quality back electret, individually fine-tuned and housed in machined aluminum. It feeds a compact, ultra-low-noise preamp in non-corrosive machined brass. Self-noise is 13.0 dB-A, and the mic takes up to 133 dB SPL. The fine-tuned mechanical RF shielding has been tested against digital wireless systems and walkie-talkies. The gold-plated Neutrik XLR takes P48 phantom power. The mic fits these Rycote windshields: the 5 cm SGM Foam, Classic-Softie, Short Fur Softie, and Super-Softie; the Nano-Shield Kit NS1-BA; the Cyclone Small; the Modular Windshield WS 10 Kit; and the 19/20 mm Baseball.

Features

  • Cardioid pencil condenser microphone
  • Virtually flat from 70 Hz to 20 kHz
  • 13.0 dB-A self-noise
  • 133 dB SPL maximum (1% THD)
  • Fine-tuned mechanical RF shielding
  • Gold-plated Neutrik XLR, P48 phantom power
  • Machined brass preamp and aluminum capsule housing
  • Includes hard case, mic clamp, and foam

What's Included

  • CA-08 microphone
  • Microphone hard case
  • Microphone clamp
  • Foam windscreen

Specifications

Polar Pattern Cardioid
Capsule Type Back electret condenser
Frequency Range 45 Hz to 20 kHz
Output Sensitivity 24.3 mV/Pa (−26.9 dB)
Self-Noise 13.0 dB(A) (±2 dB)
Signal-to-Noise Ratio 80 dB typical (1 kHz/Pa, A-weighted)
Max Output Voltage 4 Vp
Output Impedance 100 Ω
Min Load Impedance 1 kΩ
CMRR (1 kHz) Over 60 dB
Max Cable Length 100 m (328 ft)
Powering P48 (24 to 48 V; max SPL reduced at 24 V)
Current Consumption 3.0 mA
Max SPL 133 dB SPL (1 kHz, 1.0% THD); 127 dB SPL (1 kHz, 0.5% THD)
RFI Shield Yes
Connector XLR-3M
Weight 69 g (2.43 oz)
Color Matte black
Scroll to Top

MANUFACTURER RESTRICTIONS

The manufacturer limits where we can sell this product.

United States and Canada: No restrictions. Canadian orders see live shipping rates from our Toronto and Vancouver stores at checkout.

Outside the US and Canada: We may not be able to ship this product.