Lectrosonics SRc and SRc5P Dual-Channel Slot Mount Receiver
- Two Digital Hybrid receivers in one slot unit
- Fits camera slots, Duopack, and Octopack
- SRc5P adds a front TA5M output for both channels
Unavailable for shipping outside the United States and Canada.
From $2,893.00 USD
Lectrosonics SRc and SRc5P Dual-Channel Slot Mount Receiver
The Lectrosonics SRc and SRc5P are dual-channel slot mount receivers, each with two Digital Hybrid Wireless receivers in one compact housing.
They fit camera slots, the Lectrosonics Duopack adapter, and the Octopack multicoupler, and with an adapter they also run on their own from a 7 to 18 VDC source. The SRc5P adds a TA5M jack beside the control panel that carries both channels, for cameras that do not enable both audio channels in the slot.
Frequency Bands
Trew Audio carries the SRc in A1 (470.100 to 537.575 MHz), B1 (537.600 to 614.375 MHz), C1 (614.400 to 691.175 MHz), and 941 (941 to 960 MHz), and the SRc5P in A1, B1, and C1. A1, B1, and C1 each span three standard Lectrosonics blocks, about 76 MHz, with up to 3072 frequencies in 100 or 25 kHz steps. The 941 band offers 695 frequencies over 19 MHz.
Diversity and RF
The two receivers run separately, each with phase-switched antenna diversity, or together in ratio diversity for one channel. Their audio can be mixed inside the unit or kept separate. Tracking front-end filters re-tune with the operating frequency to hold off strong TV signals, followed by two SAW filters and a digital pulse counting detector. SmartSquelch adapts noise filtering and muting to weak signals, and SmartTune picks clear frequencies from a scan.
Controls and Compatibility
A sealed control panel with an LCD and four membrane switches shows pilot, diversity, RF, audio, and transmitter battery status for both receivers, and the built-in spectrum analyzer scans the band. An IR port sets up LMb, LT, HHa, HMa, and SSM transmitters, and DSP compatibility modes work with other Lectrosonics systems, Lectrosonics IFB transmitters, and some other brands’ wireless. Rear panels change with two screws: the SREXT for stand-alone use, the SRSNY for Sony slots, and the SRSUPER for Unislot cameras and the Sound Devices SL-6.
Features
- Two receivers in one ultra-compact housing
- Fits camera slots, the Duopack, and the Octopack
- Up to 76 MHz tuning across three blocks
- Phase-switched or ratio diversity
- Digital Hybrid Wireless with compatibility modes
- Tracking front-end filters for crowded RF
- LCD with RF spectrum scanning
- SmartSquelch and DSP pilot tone squelch control
- IR sync port for quick transmitter setup
- SmartTune frequency selection
Available Options
| Model | Bands | Audio Outputs |
|---|---|---|
| SRc | A1 (470-537 MHz), B1 (537-614 MHz), C1 (614-691 MHz), 941 (941-960 MHz) | Camera slot outputs |
| SRc5P | A1 (470-537 MHz), B1 (537-614 MHz), C1 (614-691 MHz) | Camera slot outputs, plus a front TA5M with both channels |
What's Included
- Adjustment tool (35679)
- 2 × AMJ antennas for the band
- Quickstart Guide
Specifications
| Receiver | |
|---|---|
| Operating Frequencies | Band A1: 470.100 to 537.575 MHz Band B1: 537.600 to 614.375 MHz Band C1: 614.400 to 691.175 MHz 941: 941 to 960 MHz (SRc-941) |
| Frequency Selection Steps | Selectable, 100 or 25 kHz |
| Receiver Type | Dual conversion superheterodyne |
| Frequency Stability | ±0.001% |
| Front End Bandwidth | 20 MHz at −3 dB |
| Sensitivity | 20 dB SINAD: 1.0 µV (−107 dBm), A-weighted 60 dB quieting: 2.2 µV (−100 dBm), A-weighted |
| Squelch Quieting | Greater than 100 dB typical |
| AM Rejection | Greater than 60 dB, 4 µV to 1 V |
| Modulation Acceptance | 85 kHz |
| Image and Spurious Rejection | 85 dB |
| Third Order Intercept | 0 dBm |
| Diversity | SmartDiversity phased antenna combining, or ratio diversity using both receivers for one channel |
| FM Detector | Digital pulse counting detector at 250 and 350 kHz |
| Antenna Inputs | 50 ohm, SMA female |
| Audio | |
| Audio Outputs | Interchangeable D connector adapters for camera slots Dual TA3 male balanced output adapter Balanced output adapter with fixed cables SRc5P: front TA5M with two balanced outputs |
| Output Level | −50 to +5 dBu in 1 dB steps; unbalanced output 6 dB lower |
| Channel Crosstalk | −80 dB or better |
| Frequency Response | 32 Hz to 20 kHz, ±1 dB |
| THD | 0.15% typical (Digital Hybrid mode) |
| System Dynamic Range | SmartNR Off: 103.5 dB, 108.0 dB with limiting SmartNR Normal: 107.0 dB, 111.5 dB with limiting SmartNR Full: 108.5 dB, 113.0 dB with limiting |
| Audio Test Tone | 1 kHz, −50 to +5 dBu (balanced), 1% THD |
| Power and Physical | |
| Power | 7 to 18 VDC, 2.6 W; 145 mA at 18 VDC, 290 mA at 7 VDC |
| Operating Temperature | −20 to 50 °C |
| Weight | 225 g (7.9 oz) with SREXT adapter |
| Dimensions with SREXT (W × H × D) | 74 × 31 × 125 mm 2.92 × 1.22 × 4.93 in |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit lectrosonics.com. |
Manuals & Docs
Related products
-
Transmitters
Lectrosonics SMWB Single-Battery Wideband Belt-Pack Transmitter
From $1,790.00 USD This product has multiple variants. The options may be chosen on the product page
