Lectrosonics M2Ra-B1C1 IEM/IFB Stereo Receiver
Built for performers and crew who need to monitor detailed audio wirelessly, the Lectrosonics M2Ra-B1C1 is a stereo IEM/IFB receiver in a compact, rugged digital beltpack.
It succeeds the M2R with a stronger front end (an IP3 of +15 dBu for tough RF environments) and protection against 48 V phantom power on the headphone jack. A single firmware runs it with AES 256-CTR encryption or without, and it has IFB, D2, and HDM compatibility modes. Choose frequencies that are approved for the region where the receiver is used.
Monitoring
A 250 mW stereo amplifier drives headphones or earphones down to 10 ohms, even inefficient ones, loud enough for the stage and other noisy places. It plays stereo, mono from the left or right channel only, or mono from both, so it serves as an IEM, an IFB, or a camera-hop receiver. Antenna diversity switches during the digital packet headers for seamless audio. Latency is 1.0 ms from a digital source plus any Dante network delay, and under 1.6 ms from an analog source.
Setup and Build
Two-way IR sync exchanges data with the DCHT and M2T transmitters. With the M2T, the receiver joins the Duet system, which Wireless Designer software manages. The machined aluminum housing has a black hard-anodized finish with laser-etched markings, and a high-resolution backlit color LCD with membrane switches runs the menus.
Power and Care
Two lithium AA batteries run it for 7 hours, and both come in the box. Moisture, including sweat, damages the receiver, so cover it with the optional M2RCVR silicone sleeve or other protection when it is worn on the body.
Features
- Stereo digital IEM and IFB receiver
- IP3 of +15 dBu for tough RF
- 48 V phantom protection on the headphone jack
- AES 256-CTR encryption, or unencrypted, in one firmware
- IFB, D2, and HDM compatibility modes
- 250 mW headphone amplifier, down to 10 ohms
- Stereo or mono from either or both channels
- Two-way IR sync and Wireless Designer support
- 7 hours on two lithium AA batteries




