Lectrosonics M2Ra-B1C1 IEM/IFB Stereo Receiver

  • Stereo digital IEM and IFB beltpack receiver
  • AES 256-CTR encryption, or unencrypted, in one firmware
  • 250 mW headphone amp, 7 hours on two lithium AA batteries

$2,300.00 CAD

Brand: Categories: , , , Trew SKU: LEC.M2RAB1C1 MPN: M2RA-B1C1

Lectrosonics M2Ra-B1C1 IEM/IFB Stereo Receiver

Built for performers and crew who need to monitor detailed audio wirelessly, the Lectrosonics M2Ra-B1C1 is a stereo IEM/IFB receiver in a compact, rugged digital beltpack.

It succeeds the M2R with a stronger front end (an IP3 of +15 dBu for tough RF environments) and protection against 48 V phantom power on the headphone jack. A single firmware runs it with AES 256-CTR encryption or without, and it has IFB, D2, and HDM compatibility modes. Choose frequencies that are approved for the region where the receiver is used.

Monitoring

A 250 mW stereo amplifier drives headphones or earphones down to 10 ohms, even inefficient ones, loud enough for the stage and other noisy places. It plays stereo, mono from the left or right channel only, or mono from both, so it serves as an IEM, an IFB, or a camera-hop receiver. Antenna diversity switches during the digital packet headers for seamless audio. Latency is 1.0 ms from a digital source plus any Dante network delay, and under 1.6 ms from an analog source.

Setup and Build

Two-way IR sync exchanges data with the DCHT and M2T transmitters. With the M2T, the receiver joins the Duet system, which Wireless Designer software manages. The machined aluminum housing has a black hard-anodized finish with laser-etched markings, and a high-resolution backlit color LCD with membrane switches runs the menus.

Power and Care

Two lithium AA batteries run it for 7 hours, and both come in the box. Moisture, including sweat, damages the receiver, so cover it with the optional M2RCVR silicone sleeve or other protection when it is worn on the body.

Features

  • Stereo digital IEM and IFB receiver
  • IP3 of +15 dBu for tough RF
  • 48 V phantom protection on the headphone jack
  • AES 256-CTR encryption, or unencrypted, in one firmware
  • IFB, D2, and HDM compatibility modes
  • 250 mW headphone amplifier, down to 10 ohms
  • Stereo or mono from either or both channels
  • Two-way IR sync and Wireless Designer support
  • 7 hours on two lithium AA batteries

What's Included

  • 2 AA lithium metal batteries
  • 35983 case insulating pads (2)
  • 35854 .035 in Allen hex key
  • Instruction manual

Specifications

RF
Operating Frequencies Band B1C1
Modulation Type 8PSK with forward error correction
Encryption AES-256 in CTR mode, or unencrypted
Compatibility Modes IFB, D2, HDM
Diversity Type Switched antenna phase, during packet headers
Third Order Intercept +15 dBu
Adjacent Channel Isolation >85 dB
Audio
Latency (overall system) Digital source: 1.0 ms plus Dante network; analog source: <1.6 ms
Frequency Response 10 Hz to 12 kHz, +0, −3 dB
THD+N 0.15% (1 kHz at −10 dBFS)
Dynamic Range >95 dB, weighted
Audio Output 3.5 mm stereo jack, 250 mW, headphones or earphones of 10 ohms min.
Output Modes Stereo; mono from left or right only; mono from both channels
Power and Physical
Power Requirements 2 x AA batteries (3.0 V)
Battery Life 7 hours on two lithium AA batteries
Power Consumption 1 W
Dimensions 3.5 × 2.375 × 0.625 in, height with knob
Weight 5.6 oz (159 g) with batteries
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.