DPA 2017 Shotgun Microphone
- Extremely directional shotgun with natural off-axis sound
- Rugged brass body tested against drops, rain, and condensation
- 13 dB(A) self-noise, 184 mm long
$1,428.00 CAD
In Stock
DPA 2017 Shotgun Microphone
Designed for the demands of broadcast, the DPA 2017 shotgun microphone pairs an extremely directional pickup with a compact, rugged build for fixed positions, booms, and camera systems.
Its interference tube attenuates sound from the sides by around 10 dB at 90° and by more than 20 dB around 125°. The sound it does pick up off-axis stays natural, just lower in level. Low self-noise of 13 dB(A), a 130 dB dynamic range, and 143 dB SPL peak handling cover both quiet scenes and loud sources.
Built for Rough Handling
The thick brass body has a protective black chrome finish, and the grid has no moving mechanical parts. DPA tests the 2017 against repeated falls, direct rain showers, and condensation, and the mic dries and returns to normal operation quickly. At 184 mm and 115 g it is shorter and lighter than many shotguns, so it fits smaller wind protection. With no switches, it can be set in its windshield and left alone. The uniform 360° grid keeps the sound consistent even if the mic rotates in its mount.
Features
- Extremely directional supercardioid pickup
- Natural, uncolored off-axis sound
- 13 dB(A) self-noise and 130 dB dynamic range
- Handles up to 143 dB SPL peak
- Brass body with a black chrome finish
- Tested against drops, rain, and condensation
- 184 mm long, 115 g
- P48 phantom power, XLR-3M
Specifications
| Acoustic | |
|---|---|
| Directional Pattern | Supercardioid at 1 kHz |
| Principle of Operation | Pressure gradient |
| Cartridge Type | Pre-polarized condenser |
| Frequency Response | 20 Hz to 20 kHz |
| Effective Frequency Range (±2 dB, at 60 cm) | 70 Hz to 18 kHz with 2 dB soft boost at 15 kHz (typical) |
| Sensitivity (±2 dB at 1 kHz) | 25 mV/Pa (−32 dB re 1 V/Pa) |
| Equivalent Noise Level (A-weighted) | 13 dB(A) typical (15 dB(A) max) |
| Distortion, THD below 1% | 140 dB SPL, 143 dB SPL peak |
| Dynamic Range | 130 dB typical |
| Max. SPL (THD 10%) | 148 dB SPL peak |
| Electrical | |
| Rated Output Impedance | 60 Ω |
| Cable Drive Capability | 100 m (328 ft) |
| Output Balance Principle | Impedance balancing with Active Drive |
| Common Mode Rejection Ratio | Over 60 dB |
| Maximum Output Voltage (RMS) | 8.7 V (21 dBu) |
| Power Supply | P48 phantom power |
| Current Consumption | 1.8 mA |
| Physical | |
| Connector | XLR-3M |
| Microphone Diameter | 19 mm (0.75 in) |
| Capsule Diameter | 17 mm (0.67 in) |
| Microphone Length | 184 mm (7.2 in) |
| Weight | 115 g (4.1 oz) |
| Color | Black |
| Temperature Range | −40°C to 45°C (−40°F to 113°F) |
| Relative Humidity | Up to 90% |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit www.dpamicrophones.com. |
