Shure TwinPlex TL48 Subminiature Lavalier Microphone

The Shure TwinPlex TL48 is a subminiature omnidirectional lavalier with a dual-diaphragm capsule and a response tailored for speech, made for dialogue in film and TV.

The TwinPlex capsule gives a full low end, an even response off axis, and low self-noise of 24.5 dB-A, and it handles up to 142 dB SPL. At 19 mm long and 5.3 mm across, it hides in costume or under wardrobe.

The 1.6 mm cable is paintable, with a double helix build and redundant grounding for long life. Versions come with LEMO3, MicroDot (through an adapter), MTQG for Shure TA4F bodypacks, open cable ends, or XLR, each with Shure’s TwinPlex mounting accessories.

Features

Dual-diaphragm omnidirectional capsule
Response tailored for speech
Low sensitivity, max. SPL 142 dB
Self-noise 24.5 dB-A
Capsule 19 mm long, 5.3 mm across
Paintable 1.6 mm cable with redundant grounding
LEMO3, MDOT, MTQG, open-end, or XLR versions
Mounting accessories included

What's Included

Single tie clip
Dual tie clip
Standoffs for clips
Vampire mount
Sticky vampire mount
Foam windscreen
Clear sticky mount
Sticky mount adhesives
Neutrik threaded shell (WA445)
Storage case

Specifications

Microphone
Capsule	Dual-diaphragm, prepolarized condenser
Polar Pattern	Omnidirectional
Frequency Response	20 Hz – 20 kHz
Sensitivity	−45.0 dBV (5.62 mV) at 1 kHz
Self-Noise	24.5 dB SPL-A
Signal-to-Noise Ratio	69.5 dB
Maximum SPL	142.0 dB SPL, 1 kHz at 1% THD
Dynamic Range	117.5 dB
Output Clipping Level	3.0 dBV, 1 kHz at 1% THD
Recommended Bias	5 V DC
Current Draw	120 – 240 µA, typical
Cable	Ø 1.6 mm, paintable 1.67 m (66 in) LEMO3, MTQG, MDOT 2.43 m (96 in) open cable ends, XLR
Capsule Size	19 mm long, Ø 5.3 mm
Weight	12 g (0.4 oz) with cable
Housing	Molded ABS
Latest Specifications	Specifications are subject to change without prior notice. For current information, visit www.shure.com.