Rycote HC-35 Shotgun Microphone

  • Hypercardioid long shotgun for sports and wide shots
  • Strong off-axis rejection
  • Matches the timbre of other Rycote mics

$709.95 USD

Availability: In Stock

Brand: Categories: , Trew SKU: RYC.979010 MPN: RYC979010

Rycote HC-35 Shotgun Microphone

Made for sports broadcast and location recording, the Rycote HC-35 is a hypercardioid long shotgun microphone for wide-angle shots, where strong rejection of loud off-axis noise is vital to clean sound.

Its interference tube is longer than those of its siblings, the HC-15 and HC-22, giving a highly directional pattern with better off-axis rejection. It shares their components and Rycote’s low-self-noise capsule, so it matches their tone and cuts together cleanly with them.

It is light for its length, so it is easy to aim on a boom inside a windshield or Classic-Softie.

Design

An individually fine-tuned, broadcast-quality back electret capsule feeds a compact, ultra-low-noise preamp in non-corrosive machined brass. The preamp has active in-line RF filtering and mechanical RF shielding, and the shielding is tested against digital wireless systems and walkie-talkies.

The interference tube is machined aluminum with a non-reflective finish, and the connector is a gold-plated Neutrik XLR.

Good to Know

The HC-35 runs on phantom power from 24 to 48 V, and its maximum SPL is lower at 24 V.

Features

  • Hypercardioid long shotgun microphone
  • Longer interference tube for better off-axis rejection
  • Self-noise of 7.5 dB-A
  • Consistent timbre with other Rycote microphones
  • Light for easy aiming in windshields
  • Active in-line RF filtering and mechanical RF shielding
  • Machined aluminum tube with non-reflective finish
  • Gold-plated Neutrik XLR connector

Specifications

Polar Pattern Hypercardioid
Capsule Back electret condenser
Frequency Range 25 Hz – 18 kHz
Output Sensitivity 21.1 mV/Pa (−33.5 dBV)
Self-Noise 7.5 dB-A
Signal-to-Noise Ratio 87 dB typical (1 kHz, 1 Pa, A-weighted)
Max SPL 133 dB SPL (1 kHz, 1.0% THD typical)
127 dB SPL (1 kHz, 0.5% THD typical)
Max Output Voltage 4 Vp (load under 2 kΩ)
Output Impedance 100 Ω
Minimum Load Impedance 1 kΩ
CMRR (1 kHz) Over 60 dB
Max Cable Length 100 m
Powering Phantom, +48 V (24 – 48 V; max SPL reduced at 24 V)
Current Consumption 3.0 mA
RF Shielding Yes
Connector XLR-3M
Length 35.24 cm
13.87 in
Diameter 1.9 cm
0.75 in
Weight 119 g (4.20 oz)
Color Matte black
Scroll to Top

MANUFACTURER RESTRICTIONS

The manufacturer limits where we can sell this product.

United States and Canada: No restrictions. Canadian orders see live shipping rates from our Toronto and Vancouver stores at checkout.

Outside the US and Canada: We may not be able to ship this product.