Rycote CA-08 Cardioid Mic + Nano Shield Kit NS1-BA Bundle

  • Cardioid pencil condenser with 13 dB-A self-noise
  • Rycote’s smallest and lightest full windshield kit
  • Low-profile XLR cable with RF filter and 80 Hz low-cut

$931.90 USD

In Stock

Brand: Categories: , , , Tag: Trew SKU: TRB.RYCCA08NS0AA MPN: 979003

Rycote CA-08 Cardioid Mic + Nano Shield Kit NS1-BA Bundle

The Rycote CA-08 bundle pairs Rycote’s compact cardioid pencil microphone with the Nano-Shield Kit NS1-BA windshield and suspension system. The Nano Shield’s Advanced Lyre mounts are softer than standard Lyres to suit light microphones, so they isolate the CA-08 from handling noise without a full-length blimp’s size and weight. Mic, suspension, and wind protection go onto the boom as one low-profile package for dialog, effects, and ambience recording on location.

The CA-08 is a professional pencil condenser with a cardioid pickup pattern that gives slight directionality while keeping a wider, more natural field than a supercardioid. Its frequency range is 45 Hz to 20 kHz. Response is virtually flat from 70 Hz up and rolls off gradually below 60 Hz. An individually fine-tuned back electret capsule in a machined aluminum body feeds a low-noise machined brass preamp, for 13 dB-A self-noise and up to 133 dB SPL. Fine-tuned mechanical RF shielding guards against interference from digital wireless systems and walkie-talkies. The 69 g mic runs on 24 to 48 V phantom power, sounds consistent with the rest of Rycote’s pencil range, and ships with a hard case, mic clamp, and foam windscreen.

The Nano Shield Kit NS1-BA is sized for microphones up to 122 mm long, which covers Rycote’s 8 cm pencil mics. It is roughly 30% lighter than Rycote’s Modular Windshield kits and more acoustically transparent, with large hexagonal pockets for less high-frequency loss and an oval basket with non-parallel sides for less internal resonance. The two basket halves lock together with magnets and sliders. Other basket sizes are available, so the kit can fit other microphones later. The mounting bar and swivel arm adjust by thumbwheel with no tools, and the kit works with Rycote’s PCS quick release. The low-profile XLR cable carries an RF filter and a switchable 80 Hz low-cut, while a 360-degree reversible XLR holder points outward for a wireless transmitter or inward for a direct cable run. A Windjammer and protective case complete the kit.

Features

  • Rycote CA-08 cardioid pencil condenser microphone
  • 13 dB-A self-noise and 133 dB SPL maximum
  • Fine-tuned mechanical RF shielding
  • Gold-plated Neutrik XLR connector
  • Nano Shield Kit NS1-BA windshield and suspension system
  • Advanced Lyre mounts tuned for lightweight microphones
  • Tool-free mounting bar and swivel arm adjustment
  • Low-profile XLR cable with RF filter and switchable 80 Hz low-cut
  • Windjammer and protective case included
  • Part numbers: Rycote CA-08 979003, Rycote Nano Shield Kit NS1-BA 086301

What's Included

  • Rycote CA-08 microphone
  • Microphone hard case
  • Microphone clamp
  • Foam windscreen
  • Nano-Shield Kit NS1-BA: 2 magnet-locking basket halves
  • Nano-Shield Kit NS1-BA: 3D-Tex covers
  • Nano-Shield Kit NS1-BA: Windjammer
  • Nano-Shield Kit NS1-BA: Lyre mounts
  • Nano-Shield Kit NS1-BA: Mounting bar with friction-brake swivel arm
  • Nano-Shield Kit NS1-BA: PCS-compatible tip and 3/8-inch adapter
  • Nano-Shield Kit NS1-BA: Low-profile XLR cable with RF filter and 80 Hz low-cut
  • Nano-Shield Kit NS1-BA: Protective case

Specifications

Microphone Rycote CA-08
Polar Pattern Cardioid
Capsule Type Back electret condenser
Frequency Range 45 Hz to 20 kHz
Output Sensitivity 24.3 mV/Pa (−26.9 dB)
Self-Noise 13.0 dB(A) (±2 dB)
Signal-to-Noise Ratio 80 dB typical (1 kHz/Pa, A-weighted)
Max Output Voltage 4 Vp
Output Impedance 100 Ω
Min Load Impedance 1 kΩ
CMRR (1 kHz) Over 60 dB
Max Cable Length 100 m (328 ft)
Powering P48 (24 to 48 V; max SPL reduced at 24 V)
Current Consumption 3.0 mA
Max SPL 133 dB SPL (1 kHz, 1.0% THD); 127 dB SPL (1 kHz, 0.5% THD)
RFI Shield Yes
Connector XLR-3M
Weight 69 g (2.43 oz)
Color Matte black
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.