RODE Wireless PRO Compact Wireless Microphone System
- Dual-channel Series IV 2.4 GHz digital transmission with a range of up to 260 m
- 32-bit float on-board recording and timecode, with 32 GB of memory per transmitter
- Includes two Lavalier II microphones and a Charge Case+
$299.00 USD
RODE Wireless PRO Compact Wireless Microphone System
The RODE Wireless PRO is a compact dual-channel wireless microphone system with two transmitters, a receiver, and two Lavalier II microphones.
Transmission
Series IV 2.4 GHz digital transmission, with 128-bit encryption and a near-zero latency codec, gives it a line-of-sight range of up to 260 m. The receiver’s 3.5mm TRRS output and a USB-C connection link the system to cameras, smartphones, and computers. It works with other RODE Series IV devices, including the Wireless ME, Wireless GO II, RODECaster Duo, RODECaster Pro II, and Streamer X. With Direct Connect in the RODE Capture app, the transmitters pair to an iOS smartphone over Bluetooth, with no receiver.
Recording and Timecode
Each transmitter records 32-bit float audio to 32 GB of internal memory, for over 40 hours of on-board recording. A recording that comes out too loud or too quiet can be recovered in post-production. Timecode syncs audio and video with no external timecode system. The receiver generates timecode and sends it to the transmitters, so their recordings carry it. The receiver also outputs timecode as an audio signal for a camera to record.
Levels and Monitoring
Gain controls and presets match the mic to the camera. The LCD display shows levels at a glance, with dedicated controls for gain and for triggering recordings, and the RODE Central app configures the system from a computer or smartphone. The high-power headphone output has on-board level control. The headphone output can also take a headset or a lavalier to capture a third audio track.
Charging and Power
The transmitters and receiver run for up to 7 hours on their built-in lithium-ion batteries, and plug-in power extends that time. The included Charge Case+ protects the system on the road and holds two complete charges for all three units. It also transfers data, so recordings can be exported on the move.
Features
- Series IV 2.4 GHz digital transmission with a range of up to 260 m
- 32-bit float on-board recording for recovering clipped or quiet audio
- 32 GB of internal memory per transmitter, for over 40 hours of recording
- Timecode for audio and video sync in post-production
- GainAssist, flexible output gain control, and a safety channel
- Locking 3.5mm TRS connectors on the transmitters
- Headphone monitoring with on-board level control
- Charge Case+ with two complete charges
- 5-year warranty
- Designed and made in Sydney, Australia
What's Included
- 2 × Wireless PRO TX
- Wireless PRO RX
- Charge Case+
- Accessory Case
- 3.5mm TRS Patch Cable (Red, 20 cm)
- USB-C Cable (Black, 30 cm)
- SC34
- 2 × Lavalier II
- 2 × MagClip GO
- 3 × furry windshields
Specifications
| Transmission | Series IV 2.4 GHz digital, 128-bit encryption |
|---|---|
| Transmission Range | 260 m (853.02 ft), line of sight |
| Acoustic Principle | Pre-polarized pressure transducer |
| Polar Pattern | Omnidirectional |
| Frequency Range | 20 Hz – 20 kHz |
| Maximum SPL | 123.5 dB SPL |
| Equivalent Noise (A-Weighted) | 22 dBA |
| Signal-to-Noise Ratio | 72 dB |
| Analog Inputs | 3.5mm locking TRS (TX) |
| Analog Outputs | 3.5mm TRRS (RX) |
| Digital Connectivity | USB-C |
| Internal Memory | 32 GB per transmitter |
| Power | In-built rechargeable lithium-ion battery, charged via USB-C (5 V, 0.4 A) |
| Operating Time | Up to 7 hours |
| Charge Case Battery Capacity | 4200 mAh |
| Charge Case Power | 5 V, 3 A via USB-C |
| Charge Case Total Charges | 2 complete charges (transmitters and receiver) |
| Weight | Transmitter: 35 g (1.23 oz) Receiver: 36 g (1.27 oz) Charge Case: 177 g (6.24 oz) |
| Dimensions | Transmitter and receiver: 46.5 × 44 × 20 mm (1.83 × 1.73 × 0.79 in) Charge Case: 101 × 82 × 70 mm (3.98 × 3.23 × 2.76 in) |
