RODE Lavalier II Omnidirectional Lavalier Microphone
- Omnidirectional lavalier microphone with a low-profile design that sits flush against clothing
- Very flat frequency response
- 3.5mm TRS locking connector and a flat 1.2 m (4 ft) cable
$109.00 USD
RODE Lavalier II Omnidirectional Lavalier Microphone
The RODE Lavalier II omnidirectional microphone sits flush against clothing, thanks to a low-profile design that makes it easy to conceal.
Its flat cable threads through clothing easily. The compact clip holds the microphone on clothing or on objects, and its slots manage the cable. The 1.2 m (4 ft) cable is shielded and reinforced with Kevlar.
The microphone has a very flat frequency response, and its omnidirectional pattern picks up sound from all directions. It runs on 1.8 V to 5 V plug-in power.
Connections
The 3.5mm TRS locking connector is made for professional wireless microphone systems. The Lavalier II also pairs with RODE’s Wireless PRO and Wireless GO II systems and the AI-Micro audio interface.
Features
- Low-profile design and compact clip
- Flat cable that threads easily through clothing
- Omnidirectional pattern with a very flat frequency response
- 3.5mm TRS locking connector
- 1.2 m (4 ft) Kevlar-reinforced shielded cable
- Pop filter for wind noise and plosives
- Mini furry windshield for high wind outdoors
- Colored ID tags for keeping track of microphones in a multi-mic setup
- Zip case for the microphone and its accessories
What's Included
- Lavalier II
- Pop filter
- Mic clip
- Mini furry windshield
- Zip case
- Set of colored ID tags
Specifications
| Acoustic Principle | Permanently polarized |
|---|---|
| Active Electronics | JFET impedance converter |
| Polar Pattern | Omnidirectional |
| Capsule | 6 mm |
| Frequency Range | 20 Hz – 20 kHz |
| Output Impedance | 2.2 kΩ |
| Signal-to-Noise Ratio | 67 dB |
| Equivalent Noise (A-Weighted) | 27 dBA typical |
| Maximum SPL | 106 dB SPL RMS (plug-in power, 1% THD) 120 dB SPL RMS (plug-in power, 10% THD) |
| Maximum Output Level | 50 mV (at 1 kHz, 1% THD into 1 kΩ load) |
| Sensitivity | −38 dB re 1 V/Pa (12.59 mV at 94 dB SPL) ±3 dB at 1 kHz |
| Dynamic Range | 79 dB typical |
| Power | 1.8 V to 5 V plug-in power |
| Output Connection | 3.5mm TRS, locking |
| Cable | 1.2 m (4 ft), Kevlar-reinforced, shielded |
| Weight | 9 g (0.32 oz) |
| Dimensions | 5 × 10 × 30.5 mm (0.2 × 0.39 × 1.2 in) |
