Name: DPA 6388 CORE+ Directional Headset Microphone
Brand: DPA Microphones
SKU: DPA6388COREP
Availability: InStock

DPA 6388 CORE+ Directional Headset Microphone

Built for demanding live stages, the DPA 6388 CORE+ directional headset pairs strong feedback rejection and clear speech with a secure, discreet fit.

Its supercardioid capsule sits in an asymmetrical housing with a shifted acoustical axis. That design and a tightly controlled proximity effect make the mic less sensitive to exact placement, so the sound stays consistent even if the headset moves during a performance.

Directionality holds steady across frequency, for predictable off-axis rejection and a stable tonal balance. That gives better isolation, less stage bleed, and more gain before feedback. The wide dynamic range handles soft and powerful vocals alike, and CORE+ keeps distortion low across all of it.

The boom switches to the left or right side, so the mic can sit beside or slightly behind the mouth. The frame is a refined version of DPA’s Act Headset Frame, for a secure, stable fit and all-day comfort. IP58 certification protects against dust and humidity. The 6388 comes in black, brown, or beige, in standard or small sizes, with MicroLock, 3-pin LEMO, TA4F Mini-XLR, or Mini-Jack termination.

Features

Supercardioid capsule with CORE+
Asymmetrical housing and shifted acoustical axis
Consistent sound when the headset moves
High gain before feedback on loud stages
Boom switches left or right
Refined Act Headset Frame for all-day comfort
IP58 against dust and humidity
Standard or small size, three colors

Available Options

Termination	Sizes	Colors	Fits
MicroLock	Standard Size and Small Size	Black, Brown, and Beige	Any wireless system, through a DPA MicroLock adapter
3-pin LEMO	Standard Size and Small Size	Black, Brown, and Beige	Sennheiser, Lectrosonics, Shure, Wisycom, and Trantec transmitters with a 3-pin LEMO input
TA4F Mini-XLR	Standard Size and Small Size	Black, Brown, and Beige	Shure, TOA, and Line 6 transmitters with a TA4F input
Mini-Jack	Standard Size and Small Size	Black, Brown, and Beige	Sennheiser Evolution and other transmitters with a threaded mini-jack input

Specifications

Acoustic
Directional Pattern	Supercardioid
Principle of Operation	Pressure gradient
Cartridge Type	Pre-polarized condenser
Frequency Response	20 Hz to 20 kHz
Effective Frequency Range (±2 dB)	100 Hz to 18 kHz, 1 dB soft boost at 14 kHz
Sensitivity (±2.4 dB at 1 kHz)	8 mV/Pa (−42 dB re 1 V/Pa)
Equivalent Noise Level (A-weighted)	26 dB(A) typical (28 dB(A) max)
Equivalent Noise Level (ITU-R BS.468-4)	37 dB typical (39 dB max)
Distortion, THD below 0.5%	138 dB SPL RMS, 141 dB SPL peak
Distortion, THD below 1%	140 dB SPL RMS, 143 dB SPL peak
Dynamic Range	117 dB typical
Max. SPL (THD 10%)	144 dB SPL peak
Electrical
Rated Output Impedance	60 to 80 Ω from MicroLock 100 Ω from DAD9001
Current Consumption	1.0 mA typical (microphone) 3.5 mA with DAD9001 XLR adapter
Cable Drive Capability	Up to 300 m (984 ft) with DAD9001 XLR adapter
Physical
Connector	MicroLock, 3-pin LEMO, TA4F Mini-XLR, or Mini-Jack
Microphone Head Size	ø6.3 / 13.3 mm (ø0.25 / 0.52 in)
Capsule Diameter	5.1 mm (0.2 in)
Cable Length	1.3 m (4.3 ft)
Weight	15 g (0.53 oz) including cable and connector
Colors	Black, brown, or beige
Temperature Range	−40°C to 45°C (−40°F to 113°F)
Relative Humidity	Up to 90%
Latest Specifications	Specifications are subject to change without prior notice. For current information, visit www.dpamicrophones.com.