RODE Wireless Micro Camera Kit Compact Wireless Microphone System
The RODE Wireless Micro Camera Kit sends sound from two clip-on transmitters to a camera or a smartphone. It comes with a receiver for each: one that mounts on the camera and one that plugs into a USB-C phone.
The kit pairs automatically out of the box. Each transmitter has a built-in omnidirectional microphone in a patent-pending acoustic chamber that reduces wind noise and the popping of hard consonants, and GainAssist controls the levels automatically. The transmitters clip onto a collar, or a magnetic attachment holds one anywhere on clothing. They have a splashproof design and a range of over 100 m, and furry windshields come in the box.
Camera Receiver
The camera receiver fits a camera’s cold shoe and connects through its 3.5mm TRS output, with the included TRS cable, or its USB-C output. Plug-in power detection turns it on when it is connected to a camera and off when it is disconnected. Its 1.1-inch AMOLED screen shows each transmitter’s signal strength and input level, and from it you set the output mode, the output gain (low, medium, or high), and the display brightness. The output mode merges both transmitters into one signal or puts them on the left and right channels for separate control in post-production.
Smartphone Receiver and Direct Connect
The smartphone receiver plugs straight into a USB-C phone with no cable and works with third-party camera apps. With an iPhone, up to two transmitters can also connect directly over Bluetooth through the RODE Capture app, with no receiver. RODE Central and RODE Capture set each transmitter’s noise reduction (off, low, or high) along with the receiver’s settings, and the kit works with RODE Reporter as well.
Battery Life
Each transmitter runs for 7 hours on a charge. The pocket-sized charging case holds the transmitters, the camera receiver, and the magnetic attachments, and adds two more charges, for up to 21 hours in all.
Good to Know
On a computer, the camera receiver works as a USB audio interface in stereo or dual mono. In RODE Connect, each transmitter comes in as its own input. Either receiver also connects to the USB microphone ports on RODECaster consoles. Each transmitter pairs with one receiver at a time, so one transmitter can feed the camera while the other feeds the phone, but neither feeds both at once.
Features
- Two clip-on transmitters with built-in omnidirectional microphones
- Camera receiver with 3.5mm TRS and USB-C outputs and a cold-shoe mount
- USB-C smartphone receiver that plugs straight into the phone
- 1.1-inch AMOLED screen on the camera receiver
- Plug-in power detection on the camera receiver
- Automatic pairing and GainAssist level control
- Patent-pending acoustic chamber against wind noise and plosives
- 7 hours per charge, up to 21 hours with the charging case
- Splashproof transmitter design
- Direct Connect to an iPhone over Bluetooth through RODE Capture












