Wisycom MATF Antenna Matrix/Combiner
- Extreme wideband system (from 170 to 1260 MHz)
- Programmable combiner up to 8 zones in diversity configuration
- Configurable by software in 8 zones into 4 outputs or dual 4 zones into 2 outputs
- Built-in spectrum analyzer to check inputs before they are switched into the combined signals, as well as to monitor combined signal
Call for pricing
800-241-8994
Release Date: TBA 2026
Wisycom MATF Antenna Matrix/Combiner
Wisycom MATF Antenna Matrix/Combiner — Designed to centralize RF distribution management. Integrates fiber and copper endpoint technologies with advanced matrix coupling in one compact frame, offering a powerful platform that adapts to nearly any installation or workflow. Whether for broadcast, OB, theater, or corporate, the MATF offers new levels of scalability and remote management.
Configuration Options
- 2 Coax + 4 Optical Inputs without Multiplexer
- 2 Coax + 6 Optical Inputs without Multiplexer
- 4 Coax + 4 Optical Inputs with M2 Multiplexer
- 2 Coax + 6 Optical Inputs with M2 Multiplexer
Features
- Extreme wideband system (from 170 to 1260 MHz)
- Programmable combiner up to 8 zones in diversity configuration. Configurable by software in 8 zones into 4 outputs or dual 4 zones into 2 outputs
- Built-in spectrum analyzer to check inputs before they are switched into the combined signals, as well as to monitor combined signal
- Remote control of gain and filter thru coaxial cable of Wisycom smart antennas (LFA, ADFA, and BFA coaxial modules)
- Simple configuration via the large color touchscreen display
Specifications
| RF Specifications | |
|---|---|
| Frequency Range | 170 MHz – 1260 MHz |
| Input Gain | −25 dB to +3 dB in 0.5 dB steps Set independently for each input module, A and B separately |
| OIP3 | +22 dBm typical, coaxial module (3 dB gain) +18 dBm typical, optical module (3 dB gain) |
| Amplifier Linearity | ±1 dB typical, coaxial module |
| Noise Figure | 6 dB typical, coaxial module (3 dB gain) 15 dB typical, optical module (3 dB gain) |
| Outputs | |
| Connectors | 4 diversity outputs (4A and 4B), BNC female, 50 Ω |
| Coaxial Inputs | |
| Connectors | 2 × BNC female (A and B), 50 Ω |
| Max RF Input Level | −10 dBm, with overload alarm |
| Antenna Booster Power | +12 V DC, 220 mA +12 V DC, 400 mA High Boost, for up to 2 coaxial modules (software configurable) |
| Optical Inputs | |
| Connectors | 2 × LC/APC, optical module without MUX (“F” version) 1 × SC/APC, optical module with MUX, 1510 nm and 1550 nm (“M” version) Note: All fiber links require single-mode fiber. A maximum of 6 optical modules is supported. |
| Input Level | −6 dBm to +6 dBm (0.25 mW to 4 mW) |
| Absolute Max Optical Power | 10 mW Do not exceed the maximum optical input power. |
| Wavelength | 1300 nm – 1650 nm, “F” module 1510 nm and 1550 nm, “M” module |
| Spectrum Scanner | |
| Frequency Range | 170 MHz – 260 MHz 460 MHz – 1260 MHz |
| Input Channels | Software selectable: any 1 of the 8 input modules, or the combined signals |
| Frequency Resolution | 50 kHz |
| Input Attenuator | 0 dB, 10 dB, or 20 dB (software selectable) |
| Timebase Accuracy | ±2.5 ppm maximum from 0 °C to 50 °C (32 °F to 122 °F) |
| Displayed Average Noise Level | −112 dBm typical |
| Displayed Amplitude Range | −117 dBm to −17 dBm |
| Max Input Level | −7 dBm (20 dB input attenuation) |
| Amplitude Accuracy | ±1.5 dB typical |
| Input IIP3 | +15 dBm typical (0 dB input attenuation) |
| Sweep Speed | 70 MHz/s with diversity inputs |
| Full-Range Sweep Time | 13 seconds |
| General | |
| USB Port | Reserved for future use |
| Control Interface | Touchscreen menu, 2 buttons, and encoder Remote control via 10/100BASE-T Ethernet |
| Power Supply | AC: 85 V – 264 V, 47 Hz – 63 Hz, 150 W max, T3.15A fuse DC: 10 V – 28 V, 150 W max |
| Power Consumption | 80 W typical (2 High Boost coaxial modules and 6 optical modules) |
| Display | 1424 × 280 px color touchscreen, 16.7 million colors |
| Temperature Range | −10 °C to +50 °C 14 °F to 122 °F |
| Dimensions (W × H × D) | 48.3 × 4.38 × 34.9 cm 19.02 × 1.72 × 13.74 in |
| Weight | Approx. 4.5 kg (9.92 lb) |
| Latest Specifications | Specifications are subject to change without notice. For current information, visit wisycom.com. |
Product Guide
Related products
-
RF Distribution
Wisycom BFLR2 Module
From $1,638.00 USD This product has multiple variants. The options may be chosen on the product page -
RF Distribution
Wisycom BFLT2 Module
From $2,425.00 USD This product has multiple variants. The options may be chosen on the product page -
Antennas
Wisycom LFA Wideband Active Antenna
From $1,017.00 USD This product has multiple variants. The options may be chosen on the product page
