Lectrosonics M2C-L Active Antenna Combiner
- Combines up to eight transmitter outputs into one antenna
- 470.100 to 692.000 MHz
- Up to 100 mW on each input
$4,195.00 USD
In Stock
Lectrosonics M2C-L Active Antenna Combiner
The Lectrosonics M2C-L is an active antenna combiner that feeds the RF outputs of up to eight Lectrosonics digital transmitters into a single antenna.
Combining the transmitters cuts the cabling a multi-channel system needs. The inputs are isolated to keep crosstalk and intermodulation between RF channels low, and high-overload components hold down intermodulation products. Each of the eight BNC inputs takes up to 100 mW.
The M2C-L covers 470.100 to 692.000 MHz, across the A1, B1, and C1 bands, in a 1RU chassis. Its efficient design keeps power use and heat low. Front panel LEDs show which RF inputs are active and warn of an overload or fault, and a front panel USB port takes firmware updates. Lectrosonics makes the M2C-L in the USA.
Features
- Combines up to eight transmitters into one antenna
- 470.100 to 692.000 MHz, A1, B1, and C1
- Isolated inputs, high-overload components
- Up to 100 mW on each input
- Efficient, low-power design
- Front panel LEDs for each input
- USB port for firmware updates
- Made in the USA
What's Included
- M2C-L combiner
- AC power cord
Specifications
| M2C-L | |
|---|---|
| RF Frequency Range | 470.100 – 692.000 MHz (A1, B1, and C1 bands) |
| Inputs | 8 × BNC, 50 Ω |
| Input Level | Up to 100 mW per port |
| Output | BNC, 50 Ω |
| Indicators | LEDs: green with signal present, yellow above 50 mW with the limiter active, blinking red on a fault |
| LED Threshold | 5 dBm |
| Firmware Updates | Front panel USB port |
| Power Requirements | 100 – 240 V AC, 50/60 Hz |
| Power Consumption | 60 W max |
| Power Inlet Fuse | 250 V AC, 2 A |
| Dimensions | 19.00 × 1.75 × 9.50 in (483 × 45 × 241 mm) |
| Operating Temperature | −20 to 40 °C (−4 to 104 °F) |
| Note | Specifications subject to change without notice. |
