Shure MXWAPXD2 Access Point Transceiver for MXW neXt 2

The Shure MXWAPXD2 puts a 2-channel wireless access point, digital audio processing, and two charging bays in one tabletop unit, the center of an MXW neXt 2 meeting room system.

It works with MXW neXt handheld, bodypack, and boundary transmitters. A mic docked in a bay charges there, and a 3-second press of the link button links it to that bay’s channel. Automatic frequency management in the 1.9 GHz DECT band keeps moving to open channels without interrupting the audio.

Built-in IntelliMix DSP adds automatic mixing, echo cancellation, noise reduction, and automatic gain control. The mode button on the front selects Presentation, Conference, Direct, or Custom. Presentation and Conference turn on the automixer and echo cancellation, Direct bypasses most of the processing, and Custom opens the matrix mixer in the control software.

Audio connects over analog, Dante, and USB-C, to a sound system, a computer, or a videoconferencing codec. The analog input takes a line or aux source, or a wired mic for a three-mic setup, and the two analog outputs carry the full mix and a mix-minus. Dual RJ45 ports can keep Dante audio and control traffic apart. The system runs standalone or on a network, controlled from its built-in web application or Shure Designer.

Features

• 2-channel access point for MXW neXt 2
• Two charging bays that also link the mics
• Automatic frequency management, 1.9 GHz DECT band
• IntelliMix DSP: automixer, echo cancellation, noise reduction
• Presentation, Conference, Direct, and Custom modes
• Analog, Dante, and USB-C audio
• Dual RJ45 ports
• External USB-C power supply