Phonak Roger Earpiece V2 Wireless In-Ear Receiver

The Phonak Roger Earpiece V2 is a wireless in-ear receiver that sits entirely inside the ear canal, so talent hears cues and program audio with no beltpack, cable, or visible earpiece on camera.

The earpiece is 18 mm long and weighs 1.3 g with its battery. It receives Phonak’s license-free 2.4 GHz Roger signal from a Roger BaseStation, a Roger On, or a Roger Repeater. Audio runs from 100 Hz to 7,200 Hz, and the output is automatically limited to 100 dB(A) SPL.

Pairing takes one press of the transmitter’s Connect button with the earpiece held within 10 cm of it, and any number of earpieces can join one network. The earpiece stays connected through a battery change. If it leaves the coverage area, it beeps softly, and it reconnects on its own when it comes back within 30 minutes. If it stays out of range for more than 30 minutes, it waits in standby and rejoins as soon as it finds its network again.

A size 10 zinc-air battery runs the earpiece for more than 20 hours of streaming, and opening the battery door switches it off. The V2 has a more sensitive receiver than the first Roger Earpiece, adding about 10 to 15 feet of range. A replaceable wax guard protects the sound outlet, and the earpiece comes in beige or brown.

Features

• Sits fully in the ear canal: 18 mm long, 1.3 g with its battery
• No beltpack or cables on talent
• License-free 2.4 GHz Roger link with adaptive frequency hopping
• Works with the Roger BaseStation, Roger On, and Roger Repeater
• 100 Hz to 7,200 Hz audio bandwidth
• Output automatically limited to 100 dB(A) SPL
• More than 20 hours on a size 10 zinc-air battery
• Stays connected through battery changes and reconnects on its own
• Unlimited earpieces on one network
• Beige or brown