Neutrik NP2RX 2-Pole Right-Angle 1/4-Inch Phone Plug

  • 2-pole right-angle 1/4-inch phone plug
  • Slim all-metal shell 14.5 mm wide
  • Nickel or black housing

From $5.67 USD

Brand: Category: Trew SKU: NEUNP2RX

Neutrik NP2RX 2-Pole Right-Angle 1/4-Inch Phone Plug

With a slim metal shell only 14.5 mm wide, the Neutrik NP2RX is a 2-pole right-angle 1/4-inch phone plug built for dense jackfields with a 15.88 mm jack pitch.

It suits guitar and audio cables, snakes, speakers, amplifiers, and mixers. Its one-piece tip contact is precision machined with no rivets, so the tip does not catch in a socket or break off. The housing is all metal, with no plastic cover, for durability and EMI protection.

A chuck-type strain relief holds cable from 4 to 7 mm in outer diameter, and the brass contacts take wire up to 1 mm² (18 AWG) on solder terminations. Neutrik makes colored boots and colored rings with a label surface for it, and a large bushing for thicker cable. Trew Audio carries it with a nickel housing and nickel contacts, or a black housing and gold contacts.

Features

  • 2-pole right-angle 1/4-inch phone plug
  • Slim diecast metal shell 14.5 mm wide
  • For jackfields with a 15.88 mm jack pitch
  • All-metal housing for durability and EMI protection
  • Precision-machined one-piece tip contact with no rivets
  • Chuck-type strain relief for cable from 4 to 7 mm
  • Solder terminations for wire up to 1 mm² (18 AWG)
  • Nickel housing with nickel contacts, or black housing with gold contacts

Specifications

General
Connection Type Plug, right-angle
Poles 2
Gender Male
Electrical
Dielectric Strength 1 kV DC
Insulation Resistance Over 2 GΩ (initial)
Rated Current per Contact Depends on the mating connector
Rated Voltage Under 50 V
Mechanical
Cable O.D. 4 – 7 mm
0.16 – 0.28 in
Lifetime Over 1,000 mating cycles
Wire Size 1 mm² (18 AWG)
Wiring Solder contacts
Material
Bushing Polyacetal (POM) + PU
Contact Plating (Nickel Contacts) 2 µm Ni (Su)
Contact Plating (Gold Contacts) 0.2 µm Au
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30% GR)
Shell Zinc diecast (ZnAl4Cu1)
Shell Plating (Nickel Housing) Nickel
Shell Plating (Black Housing) KTL coating
Strain Relief Polyacetal (POM)
Environmental
Standard Compliance IEC 60603-11 / EIA RS-453
Solderability Complies with IEC 68-2-20
Temperature Range −20 to 65 °C
−4 to 149 °F
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.