Lectrosonics PF25 Passive RF Filter
Made for the frequency block you order, the Lectrosonics PF25 passive RF filter goes in the coaxial line between a receiving antenna and a receiver or multicoupler.
Its SAW filter does the same job as a receiver’s front-end filters: it suppresses RF signals and noise outside the operating block, which cuts interference and intermodulation. Lectrosonics designed it for VRMWB and VRField WB wideband receiver systems when the receiver’s full bandwidth is not needed.
The bidirectional design passes DC phantom power, up to 350 mA, from a Venue receiver or UMC16B multicoupler through to a remote antenna amplifier. One filter can tighten the selectivity of a single receiver or multicoupler, and several can feed one set of wideband antennas into receiving systems on different frequency ranges. The housing is rugged metal with standard BNC connectors.
Features
- Passive SAW filter for one frequency block
- Suppresses interference and intermodulation from outside the block
- Passes DC phantom power to a remote antenna amplifier
- Bidirectional design
- Rugged metal housing with standard BNC connectors
Available Options
| Block | Model | Frequency Range |
|---|---|---|
| Block 23: 588.800 – 614.300 MHz | PF25-23 | 588.800 – 614.300 MHz |
| Block 24: 614.400 – 639.900 MHz | PF25-24 | 614.400 – 639.900 MHz |
| Block 27: 691.200 – 716.700 MHz | PF25-27 | 691.200 – 716.700 MHz |
| Block 944: 944.100 – 951.900 MHz | PF25-944 | 944.100 – 951.900 MHz |



