Lectrosonics UFM50 UHF Filter/Amplifier Module
The Lectrosonics UFM50 UHF filter/amplifier module covers two standard Lectrosonics frequency blocks with one 50 MHz passband.
It adds RF gain at the antenna to make up the loss in a long coaxial cable run, or sits ahead of an RF splitter to make a compact multicoupler. Two transmission line ceramic resonators at the input set the 50 MHz bandwidth. A GaAsFET amplifier then adds 12 dB of gain, with a +41 dBm output intercept point. Filtering first keeps intermodulation down and prevents overload.
Supplied attenuators set the gain to 12, 8, or 5 dB, to match the total loss of the cable and splitter it feeds. A switching regulator runs it on 8 to 16 VDC through a threaded locking power jack, and a 6 ft power cable comes with it. It can also take phantom power through the coax from a UMC16A multicoupler or a BIAS-T power inserter. A power supply is not included. The housing is cast aluminum with a brushed aluminum cover and two BNC connectors.
Features
- 50 MHz passband covering two frequency blocks
- Ceramic resonator filtering ahead of a 12 dB GaAsFET amplifier
- Gain of 12, 8, or 5 dB with the supplied attenuators
- DC power on 8 to 16 VDC or phantom power through the coax
- Cast aluminum housing with BNC connectors
Available Options
| Block Range | Model |
|---|---|
| Blocks 470-19 | UFM50-47019 |
| Blocks 19-20 | UFM50-1920 |
| Blocks 20-21 | UFM50-2021 |
| Blocks 21-22 | UFM50-2122 |
| Blocks 22-23 | UFM50-2223 |
| Blocks 24-25 | UFM50-2425 |
| Blocks 26-27 | UFM50-2627 |




