DPA 4097 CORE+ Micro Shotgun Microphone
- Supercardioid micro shotgun on a 10 cm gooseneck
- Mounts on the transmitter and aims after mounting
- CORE+ with a MicroLock connector
CAD pricing may vary; call for details
(866) 778-8739
$660.00 USD
DPA 4097 CORE+ Micro Shotgun Microphone
The DPA 4097 CORE+ is a micro shotgun microphone on a 10 cm gooseneck with a MicroLock connector, made to mount straight onto a wireless transmitter where a boom will not fit.
A supercardioid capsule sits deep inside a small interference tube under a replaceable foam windscreen. It isolates the voice in front of it, and sound from the sides keeps its natural character at a lower level. CORE+ keeps the sound clean even when someone speaks loudly or yells in a tight space such as a car, and the mic is IP58 certified.
On Set and on Location
A free-running nut at the MicroLock end of the gooseneck lets you clip the transmitter to a sun visor and aim the head at the actors. The built-in shock mount handles a moving car, the foam windscreen copes with open windows, and the matte black finish keeps reflections down. It also works as a wireless podium mic and as a light interview and voice-over mic for broadcast.
The 4097 shares the sonic character of DPA’s 4017 shotgun and 4060 and 6060 lavaliers, which saves time in the mix. MicroLock is DPA’s locking connector. A MicroLock adapter connects the mic to most professional wireless transmitters, and MicroLock parts also mate with MicroDot parts (the lock works only when both halves are MicroLock).
Features
- Supercardioid micro shotgun on a 10 cm gooseneck
- Free-running nut for aiming after mounting
- Built-in shock mount and foam windscreen
- CORE+ with 111 dB dynamic range
- High rejection of radio frequency interference
- IP58 certified
- MicroLock connector
Specifications
| Acoustic | |
|---|---|
| Directional Pattern | Supercardioid |
| Principle of Operation | Pressure gradient |
| Cartridge Type | Pre-polarized condenser |
| Frequency Response | 20 Hz to 20 kHz |
| Effective Frequency Range (±2 dB, at 20 cm) | 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz |
| Sensitivity (±3 dB at 1 kHz) | 16 mV/Pa (−36 dB re 1 V/Pa) |
| Equivalent Noise Level (A-weighted) | 23 dB(A) typical (26 dB(A) max) |
| Equivalent Noise Level (ITU-R BS.468-4) | 35 dB typical (38 dB max) |
| Distortion, THD below 0.5% | 130 dB SPL RMS, 133 dB SPL peak |
| Distortion, THD below 1% | 131 dB SPL RMS, 134 dB SPL peak |
| Dynamic Range | 111 dB typical |
| Max. SPL (THD 10%) | 136 dB SPL peak |
| Electrical | |
| Rated Output Impedance | MicroLock: 30 to 40 Ω With DAD9099 XLR adapter: 100 Ω |
| Power Supply | Wireless systems: 5 to 10 V through a DPA adapter With DAD9099: P48 phantom power (works from 12 V) |
| Current Consumption | 1.5 mA typical (microphone) 3.5 mA with DAD9099 XLR adapter |
| Cable Drive Capability | Up to 300 m (984 ft) with DAD9099 XLR adapter |
| Physical | |
| Connector | MicroLock |
| Gooseneck | 10 cm (4 in) |
| Microphone Length | 10.4 cm (4 in) |
| Weight | 10 g (0.35 oz) |
| Color | Black |
| Temperature Range | −40°C to 45°C (−40°F to 113°F) |
| Relative Humidity | Up to 90% |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit www.dpamicrophones.com. |
Related products
-
Lavalier
DPA MicroLock Adapters for Wireless Systems
From $110.00 USD This product has multiple variants. The options may be chosen on the product page -
Lavalier
DPA CM22 Heavy-Duty MicroLock Extension Cable (2.2 mm)
From $55.00 USD This product has multiple variants. The options may be chosen on the product page
