Denecke Dcode TC-DA Timecode Distribution Amplifier
- Timecode distribution amplifier and re-shaper
- One BNC input to four BNC outputs at 3 V
- Runs on 6 to 16 V DC through 4-pin Hirose
$199.50 USD
Denecke Dcode TC-DA Timecode Distribution Amplifier
One timecode signal goes in and four come out of the Denecke Dcode TC-DA, a compact timecode distribution amplifier and re-shaper with BNC outputs at 3 V peak to peak.
A low-level zero-crossing detector re-shapes marginal timecode into usable code, and the 3 V output level drives most professional equipment. The low output impedance lets the TC-DA feed timecode over long lines. Two of the four outputs are recessed into the sides to keep the footprint small.
The TC-DA has no internal battery. It runs on 6 to 16 V DC at 50 mA through a 4-pin Hirose connector, and an external power supply is available as an option. A power LED shows when the TC-DA is on, and the CNC-machined aluminum case weighs 4 oz.
Features
- One BNC input to four BNC outputs
- 3 V peak to peak output
- Re-shapes marginal timecode
- Low output impedance for long lines
- Two side-recessed outputs
- 4-pin Hirose DC input, 6 to 16 V
- CNC-machined aluminum case
Specifications
| TC-DA | |
|---|---|
| Input | −15 dB at 4.7 kΩ, BNC |
| Outputs | Four, 3.00 V peak to peak into a 600 Ω load, BNC |
| Power | 6 to 16 V DC, 50 mA, 4-pin Hirose (pin 1 ground, pin 4 DC); no battery |
| Case | CNC-machined aluminum |
| Dimensions (W x H x D) | 3.00 × 1.06 × 1.50 in (76.2 × 26.9 × 38.1 mm) |
| Weight | 4 oz |
