Cinela PIANISSIMO PIANI-1 Windshield for Schoeps KMIT + CMC 1 L

The Cinela PIANISSIMO PIANI-1 for Schoeps KMIT + CMC 1 L is a mono windshield whose suspension module is made for that capsule and amplifier with its Lemo connector.

Its suspended egg-shaped cage, slightly elliptical in section, behaves well acoustically and keeps wind noise down when the boom swings sideways. The fixed cage keeps the windshield light and well suspended. A two-axis swivel mounts it on the pole.

Fur and Options

A 3D primary fabric covers the cage, and a fur goes over it for stronger wind: short or long pile, in black, gray, or black and gray. An RF-shielded cable, marked in red, is available for work near digital transmitters. The PIANI-SHELL carries the windshield with its fabric fitted.

Good to Know

For other microphones under 21 cm, the PIANI-1 takes a suspension module chosen for the microphone. Cinela can upgrade this windshield to MS (PIANI-2) or double MS (PIANI-3).

Features

Mono windshield for the Schoeps KMIT with CMC 1 L
Suspension module made for the KMIT and CMC 1 L
Suspended egg-shaped cage with an elliptical section
3D primary fabric
Fur in short or long pile, in black, gray, or black and gray
Two-axis swivel
PIANI-SHELL polycarbonate transport shell
Upgradable to MS or double MS

What's Included

PIANISSIMO cage and two-axis swivel
Suspension module for the Schoeps KMIT with CMC 1 L
3D primary fabric
Fur cover (short or long pile; black, gray, or black and gray)
PIANI-SHELL transport shell

Specifications

Microphone	Schoeps KMIT with CMC 1 L (Lemo)
Length	32 cm without fur
Diameter	16 × 14 cm, maximum
Weight	325 g with suspension module and primary fabric, without fur
Swivel	Two-axis (SW-2AX)
Latest Specifications	Specifications are subject to change without prior notice. For current information, visit www.cinela.fr.