Audio-Technica AT897 Line + Gradient Condenser Microphone

  • Just under 11 inches long, so it stays out of the shot on compact cameras
  • Narrow acceptance angle for long-distance pickup
  • Runs on phantom power or one AA battery, with a switchable 80 Hz filter

$269.00 USD

Availability: In Stock

Brand: Categories: , Trew SKU: AUD.AT897 MPN: AT897

Audio-Technica AT897 Line + Gradient Condenser Microphone

Built for field audio in film, TV, and video production, the Audio-Technica AT897 is a short line + gradient shotgun with the narrow acceptance angle that long-distance pickup calls for.

It mounts on a DV camcorder without adding noticeable heft, and at just under 11 inches long, it stays out of the frame even on compact digital cameras. Its highly directional pattern gives crisp, intelligible sound at a distance and smooth, natural-sounding audio on axis, while rejecting sound arriving from the sides and rear. The AT897 also serves broadcast (ENG/EFP) work, wildlife recording, and sound reinforcement.

The AT897 runs on 11 to 52 V phantom power or one 1.5 V AA battery, which goes in the handle below the nameplate. On phantom power, no battery needs to be in place. Alkaline batteries give a typical 1,200 hours of use. The battery is not included.

A switchable 80 Hz high-pass filter reduces the pickup of low-frequency ambient noise such as traffic and air-handling systems, along with room reverberation and mechanically coupled vibration. The tip of a paperclip slides the switch. The included AT8405a stand clamp fits any microphone stand with 5/8″-27 threads, and two supplied O-rings hold the AT897 securely in a camera-mount holder too wide to grip it.

Features

  • Short line + gradient shotgun for video production and broadcast (ENG/EFP)
  • Just under 11 inches long, so it stays out of the shot on compact cameras
  • Narrow acceptance angle for long-distance pickup
  • Smooth, natural-sounding on-axis sound
  • Rejects sound arriving from the sides and rear
  • Runs on 11 to 52 V phantom power or one AA battery
  • Switchable 80 Hz high-pass filter
  • Rugged housing

What's Included

  • AT8405a stand clamp for 5/8″-27 threaded stands
  • 5/8″-27 to 3/8″-16 threaded adapter
  • AT8134 windscreen
  • 2 × O-rings
  • Protective carrying case

Specifications

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 20 – 20,000 Hz
Low-Frequency Roll-Off 80 Hz, 18 dB/octave
Open-Circuit Sensitivity Phantom: −40 dB (10.0 mV) re 1 V at 1 Pa
Battery: −41 dB (8.9 mV) re 1 V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Maximum Input Sound Level Phantom: 129 dB SPL, 1 kHz at 1% T.H.D.
Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 112 dB, 1 kHz at Max SPL
Battery: 98 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 77 dB, 1 kHz at 1 Pa
Phantom Power 11 – 52 V DC, 2 mA typical
Battery 1.5 V AA/UM3; 0.4 mA, 1,200 hours typical (alkaline)
Switches Flat, roll-off
Output Connector Integral 3-pin XLRM-type
Dimensions 279.0 mm (10.98 in) long, 21.0 mm (0.83 in) diameter
Weight 145 g (5.1 oz)
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.