Lectrosonics BIAST Coaxial Power Inserter
The Lectrosonics BIAST puts DC power onto a coaxial antenna cable to run a remote Lectrosonics antenna amplifier or filter/amplifier, such as the UFM230 or UFM50.
This bias-tee sits near the receiver, where power is available, with the amplifier and antenna at the far end of the cable. A feed inductor delivers DC to the BNC on the antenna side. A blocking capacitor keeps DC out of the receiver, so RF passes from one BNC to the other through the capacitor alone. It works from 60 to 950 MHz within 1 dB.
It needs a regulated 12 VDC supply, such as the CH20, DCR12/A8U, or DCR12/A4U, through a 2.1 mm locking power jack. A power supply is not included. A blocking diode protects it from reverse voltage, and a self-resetting polyfuse protects it from a short on the antenna side; removing power for a few seconds resets the fuse.
Features
- Inserts DC power onto a coaxial antenna cable
- Keeps DC out of the receiver input
- Works from 60 to 950 MHz within 1 dB
- Reverse polarity protection and a self-resetting polyfuse
- BNC connectors and a 2.1 mm locking power jack




