Sennheiser HD 480 PRO Closed-Back Studio Headphones

  • Closed-back studio headphone with 35 dB of attenuation
  • Uncolored response and Vibration Attenuation System
  • HD 480 PRO with a bag, or HD 480 PRO Plus with a travel case

From $399.00 USD

Brand: Categories: , Trew SKU: SENHD480PRO

Sennheiser HD 480 PRO Closed-Back Studio Headphones

The Sennheiser HD 480 PRO is a closed-back studio headphone for recording, mixing, and music production in the studio or on the move. It pairs an uncolored frequency response with strong isolation, so the wearer hears the signal and not the room.

Sound and Isolation

Several stages of passive shielding give 35 dB of acoustic attenuation at 5 kHz. Sennheiser’s Vibration Attenuation System reduces reflected sound and distortion for a clear low end. Each 38 mm dynamic transducer uses neodymium magnets and an ultralight voice coil, and the angled earcups put the drivers in the same place each time the headphones go on. Response runs from 3 Hz to 28.7 kHz (−10 dB), and impedance is 130 Ω.

Comfort and Service

The precision-fit design avoids pressure points and keeps sound from leaking out. The velour ear pads are washable and replaceable, and the whole headphone is serviceable. Braille markings tell the left and right earcups apart by touch, and grooves in the pads make room for glasses. The HD 480 PRO is engineered in Germany and assembled by hand in Romania, and it weighs 272 g without the cable.

Cable

The detachable cable plugs into either earcup with a 4-pin mini-XLR connector, so it can run to whichever side suits the setup. The 3 m coiled cable ends in a 3.5 mm jack with a 6.3 mm adapter, and its coil structure blocks cable-borne noise.

Features

  • Closed-back design with 35 dB of attenuation at 5 kHz
  • Uncolored frequency response for honest reference
  • Vibration Attenuation System for a clear, low-distortion low end
  • 38 mm dynamic transducers with neodymium magnets
  • Detachable cable connects at the left or right earcup
  • 3 m coiled cable with a 3.5 mm jack and 6.3 mm adapter
  • Washable, replaceable velour ear pads
  • Braille-marked earcups and grooved pads for glasses

Available Options

The HD 480 PRO comes with a soft PRO headphone bag, and the HD 480 PRO Plus comes with a travel case instead.

Model Part Number Cable Carry Option
HD 480 PRO 700499 3 m coiled PRO headphone bag
HD 480 PRO Plus 700500 3 m coiled Travel case

What's Included

Item HD 480 PRO HD 480 PRO Plus
Headphones Yes Yes
3 m coiled cable Yes Yes
PRO headphone bag Yes No
Travel case No Yes
Quick guide and safety guide Yes Yes

Specifications

Headphones
Transducer Dynamic, 38 mm
Design Closed-back, circumaural
Frequency Response 3 Hz – 28.7 kHz (−10 dB)
Nominal Impedance 130 Ω (1 kHz)
Sensitivity 107 dB SPL (1 kHz, 1 V rms); 98 dB SPL (1 kHz, 1 mW)
Max. Sound Pressure Level 130 dB SPL (1 kHz, 5% THD)
THD Under 0.5% (1 kHz, 100 dB SPL)
Attenuation 35 dB (5 kHz)
Power Rating 300 mW (100 h, noise IEC 60268)
Ear Pads Velour
Cable 3 m coiled, detachable
Connectors 4-pin mini-XLR at the headphone; 3.5 mm, with 6.3 mm adapter
Weight 272 g (9.59 oz) without cable
Operating Temperature 0 to +50 °C (32 to 122 °F)
Storage Temperature −25 to +70 °C (−13 to 158 °F)
Warranty 2 years
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.