Shure SLXD4QDAN+ Quad Channel Receiver with Dante Audio
- Four-channel SLX-D+ receiver with Dante
- RF cascade to 12 channels, audio summing
- G57 band, 470 to 608 MHz
$3,200.00 USD
Shure SLXD4QDAN+ Quad Channel Receiver with Dante Audio
The Shure SLXD4QDAN+ puts four channels of SLX-D+ digital wireless on a Dante network from one quad channel receiver, with XLR and 1/4 in outputs as well.
SLX-D+ tunes across a wide 138 MHz range, here the G57 band of 470 to 608 MHz, with transparent 24-bit audio and more than 118 dB of dynamic range. Patented digital feedback reduction places up to 16 filters per channel, and AES-256 encryption secures the audio.
ShowLink Ease keeps transmitter and receiver linked after one IR sync, so the receiver can change the transmitter’s frequency, RF power, and lock settings and update the transmitter’s firmware without a resync.
RF cascade ports pass the antenna signal to further receivers, up to three receivers or 12 channels without a distribution system, and the antenna inputs supply bias power for active antennas. Audio summing combines channels on every output for a mixer or Dante device with fewer inputs.
Its two network ports carry Dante audio and Shure control in three modes. Switched carries audio and control on both ports, Redundant sends a backup copy of the audio on the second port, and Split keeps control and audio on separate networks. Dante Controller routes the audio, and Wireless Workbench, AMX, or Crestron controls the receiver. For the same receiver without Dante, see the SLXD4Q+. The receiver also works with legacy SLX-D transmitters in the G58, H55, or J52 bands, and legacy SLX-D receivers can use SLX-D+ transmitters without ShowLink Ease.
Features
- Four channels of SLX-D+ wireless
- G57 band, 470 to 608 MHz
- ShowLink Ease remote control
- Digital feedback reduction
- AES-256 encryption
- RF cascade to 12 channels
- Antenna bias power
- Audio summing on all outputs
- Dante audio with Switched, Redundant, and Split modes
- XLR and 1/4 in outputs per channel
What's Included
- 1x SLXD4QDAN+ Receiver
- 2x 1/4 Wave Antennas
- 2x Bulkhead BNC Adapter
- 2x BNC Cable (22″)
- 1x Rack Mounting Hardware Kit
- 2x Bracket
- 1x Ethernet Cable
- 1x PS60 Power Supply
- 1x Adhesive foot
Specifications
| System | |
|---|---|
| Frequency Band | G57, 470 – 608 MHz |
| Working Range | 100 m (328 ft) |
| Latency | 2.8 ms |
| Dynamic Range | 118 dB, A-weighted, typical |
| Total Harmonic Distortion | Under 0.02% |
| High-Pass Filter | 160 Hz at −12 dB/octave |
| Receiver | |
| Channels | 4 |
| Audio Frequency Response | 20 Hz – 20 kHz (+1, −2 dB) |
| Gain Range | −18 to +42 dB in 1 dB steps |
| Outputs | 4 x XLR (mic or line) and 4 × 1/4 in (6.35 mm) |
| Mic/Line Switch | 30 dB pad |
| Antenna Inputs | BNC, 50 Ω, bias 15 V DC, 150 mA per antenna, switchable |
| Cascade Output | BNC, 50 Ω, 0 – 2 dB insertion gain |
| Network | 2 ports, 10/100 Mbps and 1 Gbps |
| Housing | Galvanized steel |
| Dimensions | 42 × 393 × 152 mm (1.65 × 15.47 × 5.98 in), H x W x D |
| Weight | 1750 g (3.86 lb), no antennas |
| Dante Modes | Switched, Redundant, Split |
| Power | 15 V at 1030 mA maximum |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit www.shure.com. |
