Shure SBC220 2-Bay Networked Docking Charger

The Shure SBC220 is a 2-bay networked docking charger that holds any two SB900-series batteries, or two transmitters and bodypacks with their Shure rechargeable batteries inside, and reports battery status to Wireless Workbench.

The Compatibility tab lists the transmitters and bodypacks it docks. Batteries reach half capacity in an hour and full charge in 3 hours, and an LED on each slot shows charging, done, or storage mode. An error LED flashes amber when charging stops, for a dirty contact or a battery outside 0 to 60 °C.

Storage mode brings each battery to 3.8 V, the right level for long-term storage. Up to four SBC220 and SBC240 chargers join side by side to share one power supply and one network connection. On the network, Wireless Workbench shows each battery’s temperature and health, and AMX or Crestron systems can also monitor the charger. Mounted on a wall, the charger takes batteries only.

Features

• Charges two batteries or transmitters
• Half charge in 1 hour, full in 3 hours
• Charge and error LEDs
• Storage mode at 3.8 V
• Gangs with up to four SBC220 and SBC240 chargers
• Ethernet for Wireless Workbench monitoring
• PS60 power supply included