Yamaha Rio3224-D3 I/O Rack
- 32 analog inputs and 16 analog outputs on XLR
- 32 transmit and 26 receive Dante channels at up to 96 kHz
- Dual redundant power supplies
$10,799.99 USD
Yamaha Rio3224-D3 I/O Rack
The Yamaha Rio3224-D3 is a Dante I/O rack with 32 analog inputs, 16 analog outputs, and 8 AES/EBU outputs, built to extend a Yamaha digital mixer or processor over a network.
It is the larger of Yamaha’s third-generation Rio racks and works with their RIVAGE PM, DM7, CL, and QL consoles. Input gain, delay, and other settings can be set on the unit’s own display and controls. Gain Compensation adjusts gain at the digital stage when separate consoles share the rack, so one operator’s analog gain change does not upset another’s mix.
A headphone socket on the rack lets you check input and output audio locally. It can also carry two Dante receive channels, which gives the engineer a direct line to the headphones. Outputs have delay, polarity, and level control, and a network port apart from the Dante network handles monitoring and device control. Compared with the D2 racks, noise is lower, dynamic range is wider, and a redesigned airflow makes the fan quieter. Dual power supplies keep the rack running if one power source fails.
Features
- 32 analog inputs and 16 analog outputs on XLR
- 8 AES/EBU outputs on XLR
- 32 transmit and 26 receive Dante channels at up to 96 kHz
- Primary and secondary Dante ports for a redundant network
- Dual redundant power supplies
- Headphone socket for local monitoring
- Delay, polarity, and level control on the outputs
- Gain Compensation for consoles sharing the rack
- Separate network port for control
- Supports AES67
What's Included
- Owner’s Manual
- 2 × AC power cords
- Open-Source Software License
Specifications
| Analog Inputs | 32, XLR, balanced, with +48 V phantom power per input |
|---|---|
| Analog Outputs | 16, XLR, balanced |
| AES/EBU Outputs | 8 (4 pairs), 24-bit, XLR |
| Dante Channels | 32 transmit; 26 receive |
| Dante Connectors | Primary and secondary, etherCON CAT5e, 1000BASE-T |
| Network Port | RJ-45, 1000BASE-T/100BASE-TX, for control |
| Headphone Output | 6.3 mm TRS, 60 mW at 8 Ω or 40 Ω |
| Sampling Frequency | 44.1, 48, 88.2, and 96 kHz |
| Signal Delay | Less than 1.7 ms at 96 kHz, input to output through a DM7 over Dante |
| Frequency Response | +0.5, −1.5 dB, 20 Hz – 20 kHz |
| Dynamic Range | 120 dB typical (DA converter); 115 dB typical (input to output) |
| Equivalent Input Noise | −128 dBu typical, gain +66 dB |
| Total Harmonic Distortion | Less than 0.05% at gain −6 dB; less than 0.15% at gain +66 dB |
| Fan Noise | NC 20 at low speed; NC 30 at high speed (1 m from the front) |
| Power Requirements | 100 – 240 V, 50/60 Hz, dual power supplies |
| Power Consumption | 100 W |
| Dimensions (W × H × D) | 480 × 220 × 370 mm (18.9 × 8.7 × 14.6 in) |
| Net Weight | 13.2 kg (29.1 lb) |
| Operating Temperature | 0 to 40 °C |
