Wisycom MCR54 B12 4-Channel Receiver
- Four true diversity channels in a slot-in receiver
- Tunes 470 to 800 MHz plus 823 to 960 MHz bands
- Analog or AES3 digital output
$5,654.00 CAD
In Stock
Wisycom MCR54 B12 4-Channel Receiver
Compact enough for a camera slot or a multi-slot mixer, the Wisycom MCR54 B12 is a 4-channel receiver that also runs on its own, with eight receiver boards giving each channel true diversity reception.
The B12 version tunes 470 to 800 MHz plus 823 to 832, 925 to 937.5, and 941 to 960 MHz, a switching range of up to 790 MHz. A high Q tunable filter and two narrowband filters guard the front end. Each channel runs wideband or narrowband FM, set in software. Narrowband improves band efficiency by more than 50 percent and adds about 3 dB of sensitivity and noise immunity.
Audio leaves as analog or AES3 digital, selected in software. The DSP companders match the ENS, ENR, and ENC companders in Wisycom’s own transmitters and emulate the companders other systems use.
A fast spectrum scan, a high contrast OLED display, and transmitter sync by infrared or Bluetooth 5 make setup quick. Wisycom Manager software monitors and controls the receiver over USB-C or Bluetooth. The MCR54 runs on 6 to 18 V DC from an external supply, or on the BCA54 battery module, and the rear panel or slot kit you pair it with sets how it connects.
Features
- Four true diversity channels from eight receiver boards
- Tunes 470 to 800 MHz plus 823 to 832, 925 to 937.5, and 941 to 960 MHz
- High Q tunable front-end filter and two narrowband filters
- Wideband or narrowband FM, set in software
- Analog or AES3 digital output
- Fast spectrum scan and high contrast OLED display
- Transmitter sync by infrared or Bluetooth 5
- Control over USB-C or Bluetooth with Wisycom Manager
- Fits camera slots and multi-slot mixers, or runs stand-alone
Specifications
| Radio | |
|---|---|
| Frequency Range | 470 to 800, 823 to 832, 925 to 937.5, and 941 to 960 MHz (B12) |
| Switching Window | Up to 790 MHz |
| Switchable Channels | 2400, in 40 groups of 60, user programmable |
| Frequency Step | 5 kHz |
| Frequency Error | Less than ±2.5 ppm over the rated temperature range |
| Modulation | FM mono, wideband or narrowband (set in software) |
| Peak Deviation | ±54 kHz wideband, ±40 kHz narrowband |
| Antenna Inputs | 50 Ω SMA (SWR below 1:2, typical 1:1.4) |
| Sensitivity | 2 µV (6 dBµV, −101 dBm) for SND/N above 58 dB |
| Adjacent Channel Selectivity | Above 80 dB typical (400 kHz spacing or more) |
| Spurious Emissions | Less than 2 nW (typical 0.1 pW) |
| Audio | |
| Noise Reduction | ENS (MTP60, MTP61, MTH610) ENR and ENC (MTP40S, MTP41S, MTP51, MTH410, MTB40S) FLAT for audio measurement DSP emulation of SA572, SA575, and RMS companders |
| Audio Bandwidth | 30 Hz to 20 kHz wideband, 30 Hz to 17 kHz narrowband |
| Frequency Response | ±1 dB across the audio bandwidth |
| Distortion | 0.3% typical |
| Signal to Noise Ratio | 120 dB typical analog, above 125 dB typical digital |
| Audio Output | Electronically balanced, 5-pin mini XLR female, analog or digital (set in software) |
| Digital Output | AES3 at 48 kHz |
| Monitor Output | 3.5 mm headphone jack |
| Control and Power | |
| Control | USB-C and Bluetooth 5 (long range) |
| Display | White OLED, 128 × 64 pixels |
| LEDs | 2 RGB LEDs for power and Bluetooth; 4 RGB LEDs for the audio status of each channel |
| Power | 6 to 18 V DC external (3 W max), or the BCA54 battery module |
| Power Consumption | 3 W max with 4 channels active, 2 W max with 2 active |
| Physical | |
| Operating Temperature | −10 to +55 °C (14 to 131 °F) |
| Dimensions (H x W x D) | 104 × 87.6 × 25 mm (4.1 × 3.4 × 1 in) |
| Weight | 230 g (8.1 oz) |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit wisycom.com. |
