Viviana Pebble Cables

Viviana Pebble Cable — Antenna cables for connecting the Viviana Pebble Body Wave Antenna to body-worn wireless transmitters. The Pebble has an SMA input and ships without a cable, so the transmitter end of the cable is chosen to match each transmitter’s antenna port. Three versions are available: SMA to SMA, SSMA to SMA, and 1-pin LEMO to SMA. Each cable version is 25 cm (9.8 in) long and uses 50-ohm cable to keep the RF chain matched between the transmitter and the Pebble, minimizing reflection and signal loss. The length leaves enough slack to position the Pebble comfortably on the body without excess cable to hide under wardrobe. Store any excess cable on the back side of the Pebble, since cable placed in front of the antenna degrades its performance.

Viviana’s compatibility guide pairs each version with specific transmitters. The SMA to SMA version fits the Lectrosonics DBSM, DBSMD, and DBSMWB, the Shure AD1 and ADX1, the Deity Theos transmitter, and the Saramonic UwMic transmitter series. The SSMA to SMA version fits sub-miniature transmitters, including the Wisycom MTP61, the Lectrosonics SMQV, SSM, LT, and LMb, and the Zaxcom ZMT3, ZMT4, and ZMT Flex. The 1-pin LEMO to SMA version fits Wisycom transmitters with a 1-pin LEMO antenna connector, including the MTP40, MTP41, MTP41S, and MTP60. Antenna connectors can change between models and product generations, so confirm the connector on the exact transmitter before ordering. Production sound mixers running transmitters from several brands can use the Pebble across the whole kit by pairing each transmitter with the matching cable.

Features

• Connects the Viviana Pebble Body Wave Antenna to a body-worn wireless transmitter
• Available in SMA to SMA, SSMA to SMA, and 1-pin LEMO to SMA versions
• SMA connector at the Pebble end on every version
• 50-ohm construction maintains a matched RF connection
• 25 cm (9.8 in) length for body-worn placement
• SMA to SMA fits Lectrosonics DBSM, DBSMD, and DBSMWB; Shure AD1 and ADX1; Deity Theos; and Saramonic UwMic transmitters
• SSMA to SMA fits Wisycom MTP61; Lectrosonics SMQV, SSM, LT, and LMb; and Zaxcom ZMT3, ZMT4, and ZMT Flex transmitters
• 1-pin LEMO to SMA fits Wisycom MTP40, MTP41, MTP41S, and MTP60 transmitters