Tentacle Sync C06 BNC Timecode Cable
- Timecode between a Tentacle and a BNC port, both ways
- Straight BNC connector
- 40 cm (16 in), right-angle 3.5 mm jack
$26.00 USD
Availability: In Stock
Tentacle Sync C06 BNC Timecode Cable
The Tentacle Sync C06 connects a Tentacle device to a BNC timecode port with a straight BNC connector.
The cable works in both directions, so it feeds timecode into a camera or takes timecode from a BNC output to jam-sync a TRACK E. It fits cameras such as the Sony FX6 and FX9, Canon C70 and C300, and ARRI AMIRA; the Compatibility tab lists more. It is 40 cm long, with a right-angle Neutrik 3.5 mm jack at the Tentacle end. Where a straight plug sticks out too far, the C08 has a right-angle BNC.
Features
- Bidirectional timecode between a Tentacle and a BNC port
- Straight BNC connector
- Right-angle Neutrik 3.5 mm jack
- 40 cm (16 in) long
- Works with SYNC E, SYNC ORIGINAL, TRACK E, and TIMEBAR
Specifications
| Cable | |
|---|---|
| Tentacle End | Right-angle Neutrik 3.5 mm mini jack (3-pin) |
| Other End | Straight BNC |
| Direction | Bidirectional |
| Length | 40 cm (16 in) |
| Weight | 28 g (0.98 oz) |
| Latest Specifications | Specifications are subject to change without prior notice. For current information, visit tentaclesync.com. |
Compatibility
| Maker | Models |
|---|---|
| Sony | FX6, FX9, PDW-700, FS7 with the XDCA-FS7 extension |
| Canon | C300, C500, C70, C80 |
| ARRI | AMIRA |
| Blackmagic Design | URSA Mini |
