Sound Guys Solutions Lav-Rod Lavalier Wiring Tool

The Sound Guys Solutions Lav-Rod makes wiring talent in tight pants quick, without sending them off to feed the cable down themselves.

Connect the lav’s connector to the adapter on the end of the rod, fish it down the side of the leg, disconnect the lav at the bottom, and pull the Lav-Rod back up. The rod is thin, strong carbon fiber, 48 inches (122 cm) long overall, with Delrin hard plastic parts.

A coated stainless steel wire joins the adapter end to the rod, so the adapter lies flat against the rod on the way down. At the bottom, the adapter opens out where it is easy to grab, and it follows the rod back up without snagging. There are no sharp edges to catch clothing or scratch the talent.

The threaded end takes the Lav-Bullet Blank’s screw-on adapters: the LB-TA for mini XLR, the LB-LEMO for Lemo, and the LB-SENN for locking 3.5 mm connectors. Thread an adapter on with care, since cross-threading can damage the rod.

Features

• Carbon fiber rod with Delrin parts
• 48 inches (122 cm) overall
• Adapter lies flat on the way down and follows the rod back up
• No sharp edges to catch clothing
• Takes the LB-TA, LB-LEMO, and LB-SENN adapters