Sony UWP-D26 Wireless Bodypack & Plug-On Package (941 to 960 MHz)
- UTX-B40 bodypack transmitter, UTX-P40 XLR plug-on transmitter, and URX-P40 receiver
- ECM-V1BMP omnidirectional lavalier included
- +48 V phantom power on the plug-on
$799.99 USD
Sony UWP-D26 Wireless Bodypack & Plug-On Package (941 to 960 MHz)
The Sony UWP-D26 gives a camera a wireless bodypack and an XLR plug-on in one box: a UTX-B40 transmitter with an ECM-V1BMP lavalier, a UTX-P40 plug-on transmitter, and a URX-P40 true diversity receiver.
This one is the 90UC block, tuning 941.625 to 951.875 MHz, 953.000 to 956.125 MHz, and 956.625 to 959.625 MHz. The bodypack and its omnidirectional lavalier go on the person talking, while the plug-on turns a handheld or shotgun microphone into a wireless one and supplies +48 V phantom power for a condenser. The receiver takes one transmitter at a time, and channel memory switches between the two. NFC SYNC sets the channel when a transmitter is held next to the receiver, and auto gain mode looks after the level. The supplied shoe mount adapter holds the receiver on a camera, and cables are included for a 3.5 mm or an XLR input.
With the optional SMAD-P5 adapter, compatible Sony cameras take a direct digital signal, power the receiver, and show its RF level, mute status, and low-battery alert in the viewfinder. On two AA batteries, the bodypack runs for about 8 hours, the plug-on for about 7 with +48 V off, and the receiver for about 6. USB Type-C can power any of them.
Features
- UTX-B40 bodypack transmitter, UTX-P40 XLR plug-on transmitter, and URX-P40 receiver
- ECM-V1BMP omnidirectional lavalier included
- +48 V phantom power on the plug-on
- NFC SYNC for quick, secure channel setting
- True double-tuner diversity reception
- Auto gain mode and a +15 dB boost for off-mic audio
- Channel memory for switching between two transmitters
- Headphone output, with a monitor mode for use as an ear monitor
- Works with the Sony WL-800 and UWP series
- Digital audio to compatible Sony cameras through the optional SMAD-P5 adapter
What's Included
- UTX-B40 bodypack transmitter
- UTX-P40 XLR plug-on transmitter
- URX-P40 receiver
- ECM-V1BMP omnidirectional lavalier microphone
- Microphone clip
- Windscreen
- 2 × belt clips
- SMAD-P4 shoe mount adapter
- Soft case for the plug-on transmitter
- 3.5 mm to 3.5 mm output cable
- 3.5 mm to XLR male output cable
Specifications
| Carrier Frequencies | 90UC: 941.625 to 951.875 MHz, 953.000 to 956.125 MHz, and 956.625 to 959.625 MHz |
|---|---|
| Transmitters | UTX-B40 bodypack transmitter; UTX-P40 XLR plug-on transmitter |
| Receiver | URX-P40 portable receiver |
| Reception Type | True diversity |
| Microphone | ECM-V1BMP omnidirectional electret condenser lavalier |
| RF Output Power | UTX-B40: 30 mW/5 mW selectable; UTX-P40: 40 mW/5 mW selectable |
| Transmitter Inputs | UTX-B40: 3.5 mm 3-pole locking mini jack; UTX-P40: XLR-3-11C type (female) |
| Frequency Response | 23 Hz to 18 kHz (typical) |
| Bodypack Dimensions | 63 × 73 × 19 mm (2 1/2 × 2 7/8 × 3/4 in), without the antenna |
| Bodypack Weight | Approx. 83 g (2.9 oz), without batteries |
| Plug-On Dimensions | 38 × 98 × 38 mm (1 1/2 × 3 7/8 × 1 1/2 in), with the input connector |
| Plug-On Weight | Approx. 139 g (4.9 oz), without batteries |
| Receiver Output Connector | 3.5 mm 3-pole locking mini jack; external connection |
| Headphone Output | 3.5 mm mini jack, max. 10 mW (16 ohm) |
| Power Requirements | DC 3.0 V (2 AA alkaline batteries); DC 5.0 V (USB Type-C), each unit |
| Battery Life | UTX-B40 approx. 8 hours at 30 mW; UTX-P40 approx. 7 hours at 40 mW with +48 V off, approx. 6 hours with +48 V on and an ECM-673; receiver approx. 6 hours |
| Receiver Dimensions | 63 × 70 × 31 mm (2 1/2 × 2 7/8 × 1 1/4 in), without the antenna |
| Receiver Weight | Approx. 131 g (4.6 oz), without batteries |
