Sony UWP-D27 Two-Channel Wireless Microphone Package
- Two UTX-B40 bodypack transmitters and a URX-P41D two-channel receiver
- Two ECM-V1BMP omnidirectional lavaliers included
- NFC SYNC with automatic channel setting
From $1,710.00 CAD
Sony UWP-D27 Two-Channel Wireless Microphone Package
The Sony UWP-D27 puts two people on a camera at once: two UTX-B40 wireless bodypack transmitters, each with an ECM-V1BMP lavalier, and a URX-P41D two-channel receiver.
Choose the 14UC block, tuning 470.125 to 541.875 MHz (UHF-TV channels 14 to 25), or the 25UC block, tuning 536.125 to 607.875 MHz (UHF-TV channels 25 to 36). Two independent receiver sections share the two antennas, giving true diversity with one channel in use and antenna diversity with both channels in use. Press and hold the NFC SYNC button and the receiver scans for two clear channels, then hold each transmitter next to it to set the channel. The ALL BAND scan mode searches every frequency band the receiver can tune. The receiver’s IR port also syncs the older UTX-B03, UTX-M03, and UTX-P03 transmitters.
The receiver’s output level adjusts by ±12 dB, and a HIGH GAIN mode suits devices that need a hotter signal. A 3.5 mm input takes a wired microphone, and a built-in mixer assigns each source to either output. Auto gain mode and a +15 dB boost look after the level at the transmitters. The supplied shoe mount adapter holds the receiver on a camera, and cables are included for a 3.5 mm or an XLR input.
With the optional SMAD-P5 adapter, compatible Sony cameras take a direct digital signal, power the receiver, and show its information in the viewfinder. On two AA batteries, each transmitter runs for about 8 hours at 30 mW and the receiver for about 4.5 hours. USB Type-C can power any of them.
Features
- Two UTX-B40 bodypack transmitters and a URX-P41D two-channel receiver
- Two ECM-V1BMP omnidirectional lavaliers included
- NFC SYNC with automatic channel setting
- ALL BAND scan mode
- IR sync with UTX-B03, UTX-M03, and UTX-P03 transmitters
- Output level control of ±12 dB, with a HIGH GAIN mode
- 3.5 mm external input on the receiver
- Auto gain mode and a +15 dB boost for off-mic audio
- OLED displays that read well indoors and outdoors
- Digital audio to compatible Sony cameras through the optional SMAD-P5 adapter
What's Included
- URX-P41D two-channel receiver
- 2 × UTX-B40 bodypack transmitters
- 2 × ECM-V1BMP omnidirectional lavalier microphones
- 2 × microphone clips
- 2 × windscreens
- 3 × belt clips
- Shoe mount adapter
- 2 × XLR to locking 3.5 mm output cables
- 3.5 mm to locking 3.5 mm cable
Specifications
| Carrier Frequencies | 14UC: 470.125 to 541.875 MHz (UHF-TV channels 14 to 25); 25UC: 536.125 to 607.875 MHz (UHF-TV channels 25 to 36) |
|---|---|
| Transmitter | UTX-B40 bodypack transmitter |
| Receiver | URX-P41D dual-channel portable receiver |
| Reception Type | True diversity for 1-channel use; dynamic switching diversity for 2-channel use |
| Microphone | ECM-V1BMP omnidirectional electret condenser lavalier |
| RF Output Power | 30 mW/5 mW selectable |
| Transmitter Input | 3.5 mm 3-pole locking mini jack |
| Frequency Response | 23 Hz to 18 kHz (typical) |
| Audio Delay | Approx. 0.35 ms (analog output); approx. 0.24 ms (digital output) |
| Receiver Analog Input | 3.5 mm 3-pole locking mini jack (unbalanced) |
| Receiver Output Adjustment | −12 dB to +12 dB (3 dB steps) |
| Receiver Output Connector | 3.5 mm 3-pole locking mini jack; external connection |
| Headphone Output | 3.5 mm mini jack, max. 10 mW (16 ohm) |
| Power Requirements | DC 3.0 V (2 AA alkaline batteries); DC 5.0 V (USB Type-C), each unit |
| Battery Life | Transmitter approx. 8 hours at 30 mW; receiver approx. 4.5 hours |
| Transmitter Dimensions | 63 × 73 × 19 mm (2 1/2 × 2 7/8 × 3/4 in), without the antenna |
| Transmitter Weight | Approx. 83 g (2.9 oz), without batteries |
| Receiver Dimensions | 63 × 70 × 35 mm (2.48 × 2.76 × 1.38 in), without the antenna |
| Receiver Weight | Approx. 159 g (5.6 oz), without batteries |
