Sony ECM-V1BMP Omnidirectional Lavalier Microphone
- Omnidirectional electret condenser capsule
- 40 Hz to 20 kHz frequency response
- Locking 3.5 mm BMP-type plug
$150.00 USD
Sony ECM-V1BMP Omnidirectional Lavalier Microphone
An omnidirectional lavalier microphone, the Sony ECM-V1BMP comes with Sony’s UWP and UWP-D bodypack transmitters and works with them.
An omnidirectional capsule picks up speech evenly from every direction, so placement on a shirt or lapel is forgiving. The 1.2 m (3.9 ft) cable ends in a locking 3.5 mm BMP-type plug wired for Sony transmitters, and the microphone does not work reliably with other brands’ gear. The microphone is also included with the UWP-V1, UWP-V6, and UTX-B2V wireless models.
Features
- Omnidirectional electret condenser capsule
- 40 Hz to 20 kHz frequency response
- Locking 3.5 mm BMP-type plug
- 1.2 m (3.9 ft) cable
- Tie clip and 3 urethane windscreens included
About Sony UWP-D Wireless
Sony‘s UWP-D series pairs analog UHF transmission with digital audio processing, which improves transient response over conventional analog wireless. The series also works with their older WL-800 and UWP systems. Sony began in 1946 as Tokyo Tsushin Kogyo, a company of about 20 employees.
What's Included
- ECM-V1BMP lavalier microphone
- Single/horizontal tie clip
- 3 × urethane windscreens
Specifications
| Capsule Type | Electret condenser |
|---|---|
| Directivity | Omnidirectional |
| Frequency Response | 40 Hz to 20 kHz |
| Sensitivity | −43.0 ±3 dB (0 dB = 1 V/Pa, at 1 kHz) |
| Output Impedance | 1.2 kΩ ±30%, unbalanced |
| Dynamic Range | 86 dB or more |
| Signal-to-Noise Ratio | 60 dB or more |
| Inherent Noise | 34 dB SPL or less |
| Maximum Input Level | 120 dB SPL |
| Connector | BMP type, 3.5 mm 3-pole mini plug |
| Cable Length | 1.2 m (3.9 ft) |
| Power Requirements | DC 5 V |
| Power Consumption | 0.2 mA or less |
| Dimensions | ø6.8 × 19.5 mm (9/32 × 25/32 in) |
| Weight | Approx. 16.2 g (0.57 oz) |
