SALE

Shure SM7dB Dynamic Vocal Microphone with Built-In Preamp

  • Dynamic vocal mic with a built-in +18 or +28 dB preamp
  • Bypass switch for the original SM7B sound
  • Bass rolloff and presence boost switches

Original price was: $750.00 CAD.Current price is: $619.00 CAD.

Brand: Categories: , Tag: Trew SKU: SHU.SM7DB MPN: SM7DB

Shure SM7dB Dynamic Vocal Microphone with Built-In Preamp

The Shure SM7dB, a dynamic vocal microphone, has a built-in active preamp that adds up to 28 dB of low-noise, flat gain. It reaches a strong level from almost any interface without an inline booster.

It carries the sound of the Shure SM7B: a smooth, flat, wide-range response for speech and music, a cardioid pattern with strong rear rejection, and shielding against hum from computer monitors and other electrical devices. An internal air suspension isolates the capsule from mechanical noise, and the pop filter handles breath sounds even for close-up vocals and narration.

Built-In Preamp

A switch on the back sets the preamp to +18 dB or +28 dB, and a bypass switch turns it off for the original SM7B performance. The preamp runs on 48 V phantom power from the interface or mixer, and the mic still works in bypass without phantom power. Quiet voices and podcasts suit the +28 dB setting, while loud singers and sources such as a guitar cabinet suit +18 dB or bypass.

For recording straight to a computer, an XLR interface with phantom power such as the Shure MVX2U does the job. Set the gain on the SM7dB first, then on the interface, for the cleanest signal.

Sound and Mounting

Two more switches shape the tone: a bass rolloff that lowers hum from air conditioning and traffic, and a presence boost that brightens the midrange for vocal clarity. The yoke mount with a captive stand nut comes set up for a boom and turns around for a stand. Along with the standard black windscreen, the SM7dB comes with the larger A7WS, which cuts plosives and wind noise further.

Features

  • Built-in preamp with +18 dB or +28 dB of gain
  • Preamp bypass for the original SM7B performance
  • Preamp powered by 48 V phantom power
  • Flat, wide-range response, 50 Hz to 20 kHz
  • Cardioid pattern with strong rear rejection
  • Bass rolloff and presence boost switches
  • Shielding against electromagnetic hum
  • Internal air suspension shock isolation
  • A7WS close-talk windscreen included
  • Yoke mount for a boom or a stand

What's Included

  • SM7dB microphone with RK345B black foam windscreen
  • A7WS large close-talk windscreen
  • 31A1856 5/8 in to 3/8 in thread adapter

Specifications

Microphone
Type Dynamic (moving coil)
Polar Pattern Cardioid
Frequency Response 50 – 20,000 Hz
Output Impedance 27 Ω (preamp engaged); 150 Ω (bypass)
Recommended Load >1 kΩ
Sensitivity (Bypass) −59 dBV/Pa (1.12 mV)
Sensitivity (+18 dB) −41 dBV/Pa (8.91 mV)
Sensitivity (+28 dB) −31 dBV/Pa (28.2 mV)
Hum Pickup 11 dB, equivalent SPL/mOe at 60 Hz (typical)
Preamp Equivalent Input Noise −130 dBV, A-weighted (typical)
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power and Build
Power Requirements 48 V DC phantom power (IEC-61938), 4.5 mA maximum, preamp engaged
Housing Black enamel aluminum and steel case with black foam windscreen
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.