Schoeps TM S Gooseneck Table Stands

Schoeps TM S Gooseneck Table Stands — Table mounted solutions from Schoeps, featuring a flexible gooseneck tube. Length: 250 mm.

Please note: The versions available through this page come without microphone amplifiers and capsules.

Features:

Gooseneck table stand
Length: 250 mm
Versions with XLR-3M output at the lower end or with 3/8″ socket, or for Colette amplifiers
For CCM -L or CMC 1 L (plus capsule), or for a Colette amplifier on one side and a capsule on the other

Available Versions:

TM S 250 L38 (Mfr. code: 123505) — Gooseneck for CCM/CMC 1 L with 3/8″ socket at the output and 5-meter cable
TM S 250 LU (Mfr. code: 123506) — Gooseneck for CCM/CMC 1 L with direct XLR-3M plug at the lower end
TM S 250 C (Mfr. code: 133509) — Gooseneck for CMC amplifier + MK capsule

Difference between _U and _38:

The __38 version, with its 3/8″ socket, can be directly mounted onto a 3/8″ tap, such as that of the ST 20-3/8 adapter, the T 5 table base, or any STR vertical support rod.
The __U version has an XLR-3M plug directly at its lower end rather than a cable.

Difference between L_ and C:

The L38 and LU versions are for CCM L or CMC 1 L plus capsule.
The C version is for a Colette capsule on the top and a CMC amplifier below.

In-table mounting:

Stands that are mounted in-table normally use a TEF table flange. For a 250 mm long in-table stand, the lightweight version TEF-S should be used, or for use with a popscreen, the medium-hard variant TEF-M.

A complete table microphone set could be made up of these items, for example:

B 1 D popscreen
CCM 4-L microphone
TM S 250 L38 gooseneck table stand
ST 20-3/8 thread adapter
TEF-M table flange

PRACTICE

_U version: This gooseneck is used at an ordinary speaking position, or, together with the socket end of an XLR cable, anchored in a TEF table flange.
_38 version: This gooseneck is for mounting on a 3/8″ tap. It is used at an ordinary speaking position, or – together with the socket end of an XLR cable, anchored in a TEF table flange.
_C version: An MK microphone capsule is screwed onto one end and a CMC microphone amplifier on the other. The CMC amplifier is then mounted in a TEF table flange.