Schoeps Mono Set CMC 6 with MK 8 Figure-Eight Capsule

  • CMC 6 U amplifier with MK 8 figure-eight capsule
  • For M/S, double M/S, and Blumlein stereo
  • SG 20 clamp, B 5 D windscreen, and case

This product is currently out of stock and unavailable.

Brand: Categories: , Trew SKU: SCHCMC68M

Schoeps Mono Set CMC 6 with MK 8 Figure-Eight Capsule

The Schoeps Mono Set CMC 6 pairs the CMC 6 U amplifier with the MK 8, a figure-eight Colette capsule made for M/S, double M/S, and Blumlein stereo.

The MK 8 is a pure pressure-gradient transducer, and M/S recording depends on its pattern staying constant from low to high frequencies. It picks up sound from the side, with a red dot on its 0° axis and a black dot on its 180° axis. Its front and back are almost perfectly symmetrical, and its self-noise is low.

Its low-frequency sensitivity falls off more than other capsules’, but its proximity effect is stronger, so placing it fairly close makes up for the loss. It is sensitive to structure-borne noise, wind, and breath, so use it with a windscreen or a shock mount. In film sound and music it often joins a Colette or CCM microphone or a CMIT shotgun as the side microphone.

The CMC 6 U amplifier detects P48 or P12 phantom power on its own and drives the cable through a balanced, transformer-free class-A output stage, with low distortion and strong rejection of radio interference.

The set comes with an SG 20 stand clamp, a B 5 D hollow foam windscreen, a Schoeps cable strap, and a case.

Features

  • CMC 6 U amplifier with MK 8 figure-eight capsule
  • Pattern constant across the frequency range
  • Side-addressed, with red and black axis dots
  • For M/S, double M/S, and Blumlein stereo
  • Runs on P48 or P12 phantom power
  • SG 20 clamp, B 5 D windscreen, and cable strap
  • Packed in a case

What's Included

  • CMC 6 U microphone amplifier
  • MK 8 figure-eight capsule
  • SG 20 stand clamp
  • B 5 D hollow foam windscreen
  • Schoeps cable strap
  • Case

Specifications

CMC 6 U Amplifier
Frequency Range 20 Hz to 20 kHz
Maximum Output Voltage 1 V (0 dBV) into 1 kΩ
Maximum SPL (THD < 0.5%) 131 dB SPL with MK 4 (P48 and P12)
Low-Cut Filter 20 Hz, 12 dB/oct
Output Impedance 42 Ω
Minimum Load Impedance 1 kΩ
Common Mode Rejection (1 kHz) Over 55 dB
Maximum Cable Length Over 400 m (1300 ft)
RFI Shield Yes
Phantom Power P48 (20 to 52 V), P12 (10 to 13 V)
Current Consumption 4 mA (P48), 8 mA (P12)
Output XLR-3M, analog, 1 channel
Length 116 mm
Diameter 20 mm
Weight 60 g
MK 8 Capsule
Pickup Pattern Figure-eight, side-addressed
Frequency Range 40 Hz to 15 kHz
Sensitivity −38.5 dB (V/Pa), 12 mV/Pa
Equivalent Noise Level (A-Weighted) 17 dB
Equivalent Noise Level (CCIR) 26 dB
Signal-to-Noise Ratio (A-Weighted) 77 dB
Maximum SPL (THD < 0.5%) 133 dB SPL with CMC 6, 137 dB SPL with CMC 1
Length 34 mm
Diameter 20 mm
Weight 18 g
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.