Schoeps CMC 1 L Microphone Amplifier

The Schoeps CMC 1 L puts the electronics of the CMC 1 U microphone amplifier behind a miniature Lemo output in place of the XLR, for setups where every millimeter counts.

Electrically it equals the CMC 6 and CMC 1 U, and it takes every MK capsule and active Colette accessory, such as the CUT 60. It also works with the accessories of Schoeps’ CCM series, such as the TR L table stand. Compared with a CCM, it gives better RF immunity and the Colette’s interchangeable capsules.

A 5 m K 5 LU cable runs from its Lemo output to an XLR-3M plug, and an SGC miniature stand mount with swivel comes with it. For booming, Schoeps recommends the MINIX CCM LU RF suspension or the Rycote INV-5.

Features

CMC 1 U electronics with a Lemo output
25.5 mm long, 28 g
Equal to the CMC 6 electrically
Takes every MK capsule and Colette accessory
Fits CCM accessories such as the TR L
K 5 LU cable to XLR-3M included
SGC stand mount included

What's Included

CMC 1 L microphone amplifier
K 5 LU cable, 5 m, Lemo to XLR-3M
SGC miniature stand mount with swivel

Specifications

CMC 1 L
Frequency Range	20 Hz to 20 kHz
Sensitivity	Depends on the capsule
Maximum Output Voltage	1.8 V (5 dBV) into 1 kΩ
Maximum SPL (THD < 0.5%)	135 dB SPL (P48), 131 dB SPL (P12), with MK 4
Low-Cut Filter	20 Hz, 12 dB/oct
Output Impedance	50 Ω ±1 Ω (8 Hz to 50 kHz)
Minimum Load Impedance	1 kΩ
Common Mode Rejection (1 kHz)	Over 55 dB
Maximum Cable Length	Over 400 m (1300 ft)
RFI Shield	Yes
Phantom Power	P48 (30 to 52 V), P12 (11 to 13 V)
Current Consumption	2 mA (P48), 3 mA (P12)
Output	Lemo, analog, 1 channel
Length	25.5 mm
Diameter	20 mm
Weight	28 g
Finish	Matte gray