Rolls PM55P Personal Monitor Amp+

  • Blends your mic with the monitor mix in headphones
  • Built-in optical limiter
  • Runs on a 9-volt battery or the included power supply

$109.00 USD

Brand: Categories: , Trew SKU: ROL.PM55P MPN: PM55P

Rolls PM55P Personal Monitor Amp+

A personal monitor amp with a built-in optical limiter, the Rolls PM55P blends a performer’s own microphone with the monitor mix in their headphones.

Vocalists use it to hear themselves over the main mix, and drummers use it to mix a click track with a monitor signal. It also works as a quick line tester for troubleshooting audio systems.

The XLR mic input has a hard-wired pass-through jack that sends the mic on to the mixer and passes phantom power with no voltage or signal loss. That jack has a ground lift. The PM55P does not supply phantom power itself. A switch sets the mic input for mic or line level, and the 1/4-inch monitor input switches between stereo and mono.

Separate mic and monitor level controls set the blend, and the limiter switches off for a full bypass. The 1/4-inch and 1/8-inch headphone outputs work at the same time. It runs for 10 to 30 hours on one 9-volt battery, alkaline preferred, or on the included Rolls PS27s power supply with the battery left in.

Features

  • Built-in optical limiter with on/off switch
  • XLR mic input with hard-wired pass-through
  • Ground lift on the pass-through jack
  • Mic or line input level switch
  • Stereo or mono 1/4-inch monitor input
  • Separate mic and monitor level controls
  • 1/4-inch and 1/8-inch headphone outputs, usable at once
  • Up to 50 dB of gain on the XLR input
  • Runs on one 9-volt battery or the included PS27s power supply
  • Made in the USA

What's Included

  • PM55P Personal Monitor Amp+
  • Rolls PS27s 15 V power supply
  • Owner’s manual

Specifications

Inputs XLR mic with XLR pass-through; 1/4 in TRS monitor, stereo or mono
Outputs 1/4 in and 1/8 in (3.5 mm) stereo headphone
Input impedance 600 ohms (mic), 22k ohms (monitor)
Output impedance 10 ohms
Gain 50 dB (XLR), 20 dB (1/4 in)
Signal-to-noise ratio 90 dB
Limiter threshold 0 dB
Maximum output 100 mW into 16 ohms
Power 9 to 15 VDC; one 9 V battery or the Rolls PS27s power supply
Battery life 10 to 30 hours, depending on use
Size 4.5 × 4 × 1.375 in (114 × 102 × 35 mm)
Weight 1 lb (0.45 kg)
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.