RODE VideoMic Pro Directional On-Camera Microphone
- Directional on-camera microphone with a tight supercardioid pattern
- Integrated Rycote Lyre shock mounting, at only 85 g
- High-pass filter and three-stage gain control with a +20 dB boost
$239.00 USD
RODE VideoMic Pro Directional On-Camera Microphone
Compact and only 85 g, the RODE VideoMic Pro is a directional on-camera microphone with a condenser capsule and a tight supercardioid polar pattern.
Integrated Rycote Lyre shock mounting isolates the mic from handling noise, and it has a windshield for recording outdoors. A high-pass filter at 80 Hz reduces low-end rumble from traffic, air conditioners, and other environmental noise.
A three-stage gain control, with a +20 dB level boost, helps you set your recording levels. The mount has a 3/8″-16 thread, and the mic works with the RODE VXLR Pro, Boompole, and Tripod 2.
Good to Know
The VideoMic Pro runs on one 9V alkaline battery, sold separately, for over 70 hours.
Features
- Supercardioid pickup for focused, directional audio
- Integrated Rycote Lyre shock mounting
- Windshield for recording outdoors
- 80 Hz high-pass filter
- Three-stage gain control with a +20 dB boost
- 14 dBA equivalent noise level
- Over 70 hours from a 9V alkaline battery
- 10-year warranty
Specifications
| Acoustic Principle | Line Gradient |
|---|---|
| Active Electronics | JFET impedance converter |
| Capsule | 0.50″ |
| Polar Pattern | Supercardioid |
| Address Type | End |
| Frequency Range | 40 Hz – 20 kHz (selected HPF at 80 Hz) |
| Output Impedance | 200 Ω |
| Maximum SPL | 134 dB SPL |
| Equivalent Noise Level (A-Weighted) | 14 dBA |
| Power Requirements | 9V alkaline battery |
| Output Connection | 3.5mm TRS |
| Weight | 85 g (3.00 oz) |
| Warranty | 10 years |
