RODE NTH-100M Professional Over-Ear Headset

  • Professional over-ear headset built on the NTH-100 headphones
  • Detachable broadcast-grade microphone with a locking connector
  • Alcantara cushions, CoolTech gel, and a FitLok locking headband

$199.00 USD

Brand: Categories: , , , , , Trew SKU: ROD.NTH100M MPN: NTH100M

RODE NTH-100M Professional Over-Ear Headset

The RODE NTH-100M is a professional over-ear headset that pairs the NTH-100 headphones with a broadcast-quality headset microphone, for media, broadcast, podcasting, streaming, gaming, and working from home or in the office.

Sound and Voice

Custom-matched drivers and the headphones’ acoustic construction give an accurate frequency response and low distortion. The microphone is positioned to reject plosives, the puffs of air from hard P and B sounds.

Comfort and Fit

Alcantara cushions on the earcups and headband are soft and breathable, and each earcup holds a layer of CoolTech gel that absorbs and dissipates heat. The earcups move in two directions and use memory foam, so they stay comfortable even if you wear glasses. The FitLok system locks the adjustable headband, so it stays at the right setting each time you put the headset on. The low-profile microphone does not cover your face on camera.

Microphone and Parts

The microphone detaches through a sturdy locking connector, leaving a pair of professional monitoring headphones. The cushions, cables, and microphone are user replaceable, and the high-strength spring steel headband has a scratch-resistant coating.

Connections

The included cable works with game consoles that have a standard 3.5mm port. The PlayStation 5 and Xbox Series X|S connect through the controller, and the Nintendo Switch connects on the console itself. The splitter cable connects to computers and other devices with a separate microphone input and headphone output.

For the RODECaster Pro II, use the splitter cable and a 3.5mm to XLR adapter such as the VXLR Pro or VXLR+. The splitter’s microphone end goes through that adapter to an XLR input with phantom power on, and its headphone end goes to a headphone output through the supplied 1/4-inch adapter.

The NTH-Cable is a TRS cable and does not work with this headset.

Features

  • Custom-matched 40 mm dynamic drivers
  • Broadcast-grade omnidirectional headset microphone
  • Detachable microphone with a sturdy locking connector
  • Alcantara earcup and headband cushions with CoolTech gel
  • Adjustable spring steel headband with FitLok locking system
  • Two attachment points for the TRRS cable
  • Splitter cable for separate microphone and headphone connections
  • User-replaceable cushions, cables, and microphone
  • Lifetime warranty on the headphones, excluding the NTH-Mic and replaceable parts such as pads and cables

What's Included

  • NTH-100 (Black)
  • NTH-Mic
  • Storage pouch
  • 2.4m TRRS cable
  • Splitter cable
  • COLORS ID set
  • 3.5mm to 1/4″ adapter

Specifications

Transducer Size 40 mm
Operating Principle NTH-100: Dynamic
NTH-Mic: Permanently polarized
Active Electronics JFET impedance converter
Polar Pattern Omnidirectional
Frequency Response NTH-100: 5 Hz – 35 kHz
NTH-Mic: 20 Hz – 20 kHz
Signal-to-Noise Ratio 67 dB
Equivalent Noise Level (A-Weighted) 27 dBA typical
Maximum SPL 106 dB SPL RMS (plug-in power, 1% THD)
123 dB SPL RMS (plug-in power, 10% THD)
Maximum Output Level 307 mV (at 1 kHz, 10% THD into 1 kΩ load)
Impedance 32 Ω
Sensitivity NTH-100: 110 dB/V
NTH-Mic: 12.59 mV at 94 dB SPL, ±3 dB at 1 kHz
Maximum Input Power 1700 mW, 1% THD at 1 kHz
Ear Coupling Circumaural
Ambient Noise Attenuation 20 dBA
Connection Type NTH-100: Dual TRRS cable attachments
NTH-Mic: 3.5mm bayonet jack
Dynamic Range 92 dB at max input
Cable Length 2400 mm
Weight NTH-100: 350 g (0.77 lb)
NTH-Mic: 5 g (0.18 oz)
Dimensions NTH-100: 80 mm (L) × 190 mm (W) × 188 mm (H), 3.15 in × 7.48 in × 7.40 in
NTH-Mic: 123 mm (L) × 40 mm (H) × 17 mm (D), 4.84 in × 1.57 in × 0.67 in
Warranty Lifetime on the NTH-100 headphones, excluding the NTH-Mic and replaceable parts such as pads and cables
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.