PSC Bell and Light Station

The PSC Bell and Light Station rings the bell and shows the warning light outside a set, in two colors: steady green when the crew is free to move, flashing red while the camera rolls.

The round station shows its light a full 360 degrees, and a built-in roll cage of aluminum posts protects the bell and electronics. A switch on each station sets a slow, medium, or fast flash, and another turns its bell off where a bell is not wanted. Cable from the power supply plugs into the male XLR, and the female LINK XLR feeds the next station. Up to 10 stations daisy chain this way, on runs of up to 1000 ft from the power supply.

Three threaded holes (1/4-20, 3/8-16, and 5/8-27) mount it on a stand, a clamp, or a microphone stand. A mounting bolt must not reach more than 1/4 in into the station, or it damages the bell.

Features

• Steady green between takes, flashing red while rolling
• 360-degree light visible from any direction
• Built-in roll cage protects the bell and electronics
• Slow, medium, or fast flash rate per station
• Bell on or off per station
• XLR in and LINK out to daisy chain up to 10 stations
• 1/4-20, 3/8-16, and 5/8-27 mounting threads
• 6061-T6 aircraft aluminum, gloss white powder coat