Pelican 1650 Protector Case

From: 319.95 USD

Pelican 1650 Large Case — Provides a watertight, crush-proof, and dust-proof case. Open cell core with solid wall design.

  • 28.57″ x 17.52″ x 10.65″
Clear
SKU: PEL1650 Categories: , , Tag:
Share on:
Share on google Share on pinterest Share on mail

Description

Pelican 1650 Protector Case

Pelican 1650 Protector Case — Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

Key Features

  • 4 strong polyurethane wheels with stainless steel bearings
  • Watertight, crushproof, and dustproof
  • 2 level Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Retractable extension handle
  • Fold down handles
  • Easy open Double Throw latches
  • Stainless steel hardware and padlock protectors
  • Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
  • O-ring seal
Interior (L×W×D) 28.57 x 17.52 x 10.65 in (72.6 x 44.5 x 27.1 cm)
Exterior (L×W×D) 31.59 x 20.47 x 12.45 in (80.2 x 52 x 31.6 cm)
Lid Depth 1.81" (4.6 cm)
Bottom Depth 8.84" (22.5 cm)
Total Depth 10.65" (27.1 cm)
Int Volume 3.08 ft³ (0.087 m³)
Padlock Hole Diameter 5/16" (8 mm)
Weight With Foam 28.06 lbs (12.7 kg)
Weight Empty 24.03 lbs (10.9 kg)
Buoyancy 181.00 lbs (82.1 kg)
Wheels 4
Extendable Handle yes
Body Material Polypropylene
Latch Material ABS
O-Ring Material Polymer
Pins Material Stainless Steel
Foam Material 1.3 lb Polyurethane
Purge Body Material ABS
Purge Vent Material 3 Micron Hydrophobic Non-Woven
Foam Layer 1 (Lid) 1.75" (4.4 cm) - Convolute
Foam Layer 2 (Base) 1.00" (2.5 cm) - Pad
Foam Layer 3 (Base) 3.75" (9.5 cm) - Pick N Pluck
Foam Layer 4 (Base) 3.75" (9.5 cm) - Pick N Pluck
Minimum Temperature -40° F (-40 ° C)
Maximum Temperature 210° F (99 ° C)