Lectrosonics Quadpack for SR Series Receivers

Built for bag systems, the Lectrosonics Quadpack holds two SR Series receivers for four channels of audio and connects them to balanced outputs and DC power in one rugged housing.

Four balanced XLR outputs sit on one side panel, and four balanced TA3 outputs share the other with the power jacks. One set can feed a recorder while the other feeds wireless transmitters that send audio to cameras. The two panels can be swapped to opposite sides.

DC power comes in through a locking LZR coaxial jack, a Hirose 4-pin jack, or both at once. The Quadpack draws from whichever source has the higher voltage, so one source backs up the other if it drops out. It takes 7 to 18 VDC at up to 400 mA.

Each slot has a 25-pin Unislot connector for power and audio. Fit the SRUNI rear panel adapter to each receiver, then slide the receiver in until its front flange sits flush with the top panel. The housing is powder-coated aluminum. The receivers are sold separately.

Features

Holds two SR Series receivers
25-pin Unislot connector in each slot
Four balanced XLR outputs
Four balanced TA3 outputs
Output panels can be swapped
Locking LZR coaxial DC power jack
Hirose 4-pin DC power jack
Powder-coated aluminum housing

What's Included

Slot plug (P1139)
Combo tool (P1246)
Manual

Specifications

Connections
Receiver Connector	DB-25 (Unislot), one per slot
Audio Outputs	4 balanced XLR male 4 balanced TA3 male
Power Connectors	Hirose 4-pin Coaxial (LZR), locking
Power Requirements	7 to 18 VDC, 400 mA maximum
Physical
Dimensions	4.95 × 9.40 × 1.40 in (H × W × D)
Weight	1 lb 5 oz (assembly only)
Housing	Powder-coated aluminum
Latest Specifications	Specifications are subject to change without prior notice. For current information, visit lectrosonics.com.