AudioPressBox APB-D216 R-D Dante Rack Drive Unit, 16 Outputs

  • 2 line inputs or 2 Dante channels, switchable
  • 16 transformer-isolated XLR outputs, each switchable to mic or line level
  • Two expander outputs add up to 48 more outputs

$4,065.00 USD

Brand: Category: Trew SKU: APB.APBD216RD MPN: APB-D216 R-D

AudioPressBox APB-D216 R-D Dante Rack Drive Unit, 16 Outputs

The AudioPressBox APB-D216 R-D mounts in a 19-inch rack and sends two line or Dante channels to 16 front-panel XLR outputs in two groups, with two rear outputs that feed AudioPressBox expanders.

Each of the two channels switches between a balanced line input, on XLR or 6.3 mm jack, and a Dante channel with a digital-to-analog converter. Each input channel has a switchable high-pass filter, set to full range or a 160 Hz low cut, and a switchable compressor and limiter that helps keep the outputs free of clipping and distortion.

Each output is transformer isolated and switches between mic and line level. Two buffered expander outputs on the rear drive six APB-008 expanders or two APB-024, adding up to 48 Line/Mic outputs on top of the 16 front outputs.

The unit runs on a 24 V DC external power supply, and the Dante interface takes PoE from a PoE network switch or a separate injector. Use only an IEEE 802.3af compliant PoE injector, since a non-compliant one can damage the unit.

Features

  • 2 balanced line inputs on XLR or 6.3 mm jack
  • 2-channel Dante input, each channel switchable with its line input
  • 16 balanced XLR outputs in two groups, each transformer isolated
  • Each output switchable between mic and line level
  • Switchable high-pass filter and compressor/limiter on each input channel
  • 2 buffered expander outputs for up to 48 more outputs
  • 19-inch rack mount, 2 RU

Specifications

Inputs 2 Line, balanced XLR or 6.3 mm jack, or 2 Dante channels (switchable)
Input Impedance Greater than 5 kΩ
Dante Input 2 channels, RJ45; PoE required, under 2 W; injector IEEE 802.3af compliant
Outputs 16 Mic/Line, balanced XLR, each transformer isolated
Output Groups 2
Expander Output 2 buffered, balanced XLR; drive 6 APB-008 or 2 APB-024 expanders (up to 48 Line/Mic outputs)
Output Level +6 dBu nominal; +20 dBu maximum (no load), +14 dBu (600 Ω)
Output Impedance Mic 220 Ω; Line 600 Ω
Frequency Response 20 Hz to 36 kHz (−3 dB); 160 Hz low cut with the high-pass filter
Signal-to-Noise Ratio 86 dB at 0 dB gain; 78 dB at +20 dB gain
Power Supply 24 V DC, 1 A external adapter; Dante interface powered by PoE
Dimensions 19-inch rack, 2 RU; 480 mm (18.90 in) wide
Weight 3.46 kg (7.63 lb)

Compatibility

Expander Type
APB-008 SB-EX Portable expander, 8 Line/Mic outputs
APB-008 IW-EX In-wall expander, 8 mic outputs
APB-008 OW-EX On-wall expander, 8 mic outputs
APB-008 FB-EX Floor box expander, 8 Line/Mic outputs
APB-024 R-EX Rack expander, 24 Line/Mic outputs
APB-P008 OW-EX On-wall expander, 8 mic outputs
APB-P008 IW-EX In-wall expander, 8 mic outputs
APB-P112 SB-EX Expander
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.