Audio-Technica BPHS1 Broadcast Stereo Headset
- Closed-back, circumaural ear cups seal out background noise
- High-output cardioid dynamic mic on a flexible gooseneck boom
- Detachable BPCB1 cable with XLR and 1/4-inch plugs
$239.00 USD
In Stock
Audio-Technica BPHS1 Broadcast Stereo Headset
Built for on-air news and sports broadcasting, announcing, and interviews, the Audio-Technica BPHS1 is a broadcast stereo headset that pairs closed-back headphones with a high-output dynamic microphone.
Its cardioid microphone is tailored for natural, intelligible vocal reproduction and rejects sound from off axis. It sits on a flexible gooseneck boom that swivels for use on the right or left side.
The closed-back, circumaural ear cups seal out background noise, and 40 mm drivers with neodymium magnets cover 20 to 20,000 Hz. The headband is adjustable, cushioned, and lightweight, and the headset weighs 264 g (9.3 oz).
The included BPCB1 cable is detachable and 3.3 m (10.8 feet) long. It has an 8-pin connector at the headset, a 3-pin XLR plug for the microphone, and a 6.3 mm (1/4-inch) three-conductor phone plug for the headphones. The cable and ear pads are user-replaceable. Three windscreens and a spare connector screw are also included.
Features
- Closed-back, circumaural ear cups seal out background noise
- High-output cardioid dynamic microphone tailored for speech
- Flexible gooseneck boom swivels for right or left side use
- 40 mm drivers and neodymium magnets
- Adjustable, cushioned, lightweight headband
- User-replaceable cable and ear pads
- Detachable BPCB1 cable with XLR and 1/4-inch plugs
What's Included
- BPCB1 detachable cable with 3-pin XLRM-type and 6.3 mm (1/4″) phone plug
- 3 × windscreens
- Spare connector screw
Specifications
| Headphone Type | Closed-back dynamic |
|---|---|
| Microphone Type | Cardioid dynamic |
| Driver Diameter | 40 mm |
| Frequency Response (Headphones) | 20 – 20,000 Hz |
| Frequency Response (Microphone) | 40 – 20,000 Hz |
| Maximum Input Power | 1,600 mW at 1 kHz |
| Sensitivity (Headphones) | 100 dB |
| Sensitivity (Microphone) | −57 dB (1.4 mV) re 1 V at 1 Pa |
| Impedance (Headphones) | 65 ohms |
| Impedance (Microphone) | 560 ohms |
| Magnet | Neodymium |
| Voice Coil | Copper-clad aluminum wire |
| Cable | 3.3 m (10.8 ft) detachable; 8-pin connector at the headset; 3-pin XLRM-type (microphone) and 6.3 mm (1/4″) phone plug (headphones) |
| Weight | 264 g (9.3 oz) |
