SALE

Shure SM4 Cardioid Condenser Microphone

  • Cardioid condenser with a 1 in dual-diaphragm capsule
  • Shielded against RF noise from phones and Wi-Fi
  • Swivel mount or Home Recording Kit

From $219.00 USD

Shure SM4 Cardioid Condenser Microphone

Built for vocals and instruments in a home studio, the Shure SM4 is a cardioid condenser microphone with a 1 in brass dual-diaphragm capsule that captures controlled lows and smooth, detailed highs.

The dual-diaphragm design gives it a large sweet spot and reduces proximity effect, the bass buildup that comes with working close to a mic. Its Interference Shielding Technology surrounds the capsule with a woven mesh Faraday cage and an integrated pop filter, blocking RF noise from cell phones, laptops, and Wi-Fi routers.

With a maximum SPL of 140 dB and a self-noise of 13 dB SPL, it handles soft vocals as well as drums, guitar amps, and horns. The all-metal body has a low-profile shape that stays out of the way on camera. It needs 48 V phantom power from an interface or mixer.

Choosing a Kit

The SM4-K comes with the A4M swivel-mount microphone clamp, a brass stand adapter, and a zippered pouch. The SM4-K-KIT Home Recording Kit trades the clamp for a shock mount that damps rumble and vibration. It adds a detachable magnetic pop filter that works with the internal one as a two-stage plosive filter, and it comes in a zippered carrying case.

Features

  • 1 in brass dual-diaphragm condenser capsule
  • Cardioid pattern with a large sweet spot
  • Interference Shielding Technology against RF noise
  • Internal pop filter
  • 140 dB SPL maximum, 13 dB SPL self-noise
  • All-metal, low-profile body
  • Needs 48 V phantom power
  • Swivel mount, or shock mount, magnetic pop filter, and case in the kit

What's Included

  • SM4 microphone
  • Brass mic stand adapter
  • A4M swivel-mount microphone clamp (SM4-K)
  • Zippered pouch (SM4-K)
  • Shock mount (SM4-K-KIT)
  • Magnetic pop filter (SM4-K-KIT)
  • Zippered carrying case (SM4-K-KIT)

Specifications

Microphone
Type Condenser (externally biased)
Capsule 1 in brass dual-diaphragm
Polar Pattern Cardioid
Frequency Response 20 – 20,000 Hz
Output Impedance 150 Ω
Sensitivity −38 dBV/Pa (17.8 mV) at 1 kHz
Maximum SPL 140 dB SPL (1 kHz at 1% THD, 1 kΩ load)
Self-Noise 13 dB SPL, A-weighted (typical)
Signal-to-Noise Ratio 79 dB
Dynamic Range 125 dB (1 kΩ load)
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power and Build
Power Requirements 48 V DC phantom power (5.3 mA)
Connector 3-pin XLR, male
Housing Die-cast zinc
Weight 463 g (1.02 lb)
Scroll to Top

The manufacturer limits where we can sell this product.

North America: No restrictions. U.S. and Canadian orders see live shipping rates for their respective regions at checkout.

Outside North America: We can’t ship this product, and checkout won’t accept an address outside North America for orders that include this product.