Kit Bravo Kit-Y 2.4GHz Directional Antenna
The Kit Bravo Kit-Y is a compact 2.4GHz directional antenna that improves the remote-control range of Zaxcom ZaxNet, Sound Devices NexLink, Phonak Roger, and other systems working in the 2.4GHz band. With 8.5 dBi of peak gain, it reaches up to twice the range of a standard 2 dBi whip antenna.
The Kit-Y needs no ground plane, so unlike a whip antenna it can sit away from the equipment’s chassis, wherever it works best. It can get the signal around a building or a corner, go up on a mast for a clear line of sight, or move away from sources of RF noise. A 1/4-inch thread mounts it on any support.
Because it is directional, it can improve the signal-to-noise ratio of the link in critical situations. It is light, easy to store and carry, and made of a very durable, weather-resistant material. Kit Bravo designs and manufactures it in the EU.
Aiming the Antenna
Point the tip of the antenna at the other device. The beam is 53° wide in one plane and 70° in the other, so a rough orientation is enough. With the connector pointing down, its polarization is vertical, like most stock antennas; turn it 90° when the other antenna is horizontal.
Good to Know
Cable runs lose a lot of signal at 2.4GHz, so run the Kit-Y on a very low-loss 50-ohm cable: flexible LMR-240 on set, or LMR-400 for fixed installations.
Features
- Directional 2.4GHz antenna with 8.5 dBi peak gain
- Up to twice the range of a standard 2 dBi whip antenna
- No ground plane needed, so it can be placed away from the equipment
- SMA female connector, 50 ohms, handles up to 10 W
- 1/4-inch thread for a stand, mast, or other support
- Wide beam needs only rough aiming
- Light, durable, and weather-resistant
- Designed and made in the EU











